1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Disabling Auto Door Locking / Unlocking

Discussion in 'Gen 3 Prius Main Forum' started by stream, Jun 3, 2009.

  1. stream

    stream Senior Member

    Joined:
    May 12, 2008
    2,977
    452
    14
    Location:
    Long Island, NY
    Vehicle:
    2010 Prius
    Model:
    V
    On page 69 & 70 of the owners manual it has instructions for disabling the auto door locking (when moving shifter out of "P") and unlocking (when shifting to "P").

    I can't make it work.

    It says to switch power to ON (which is pressing the power button twice without your foot on the brake, according to the owners manual), then press P and press & hold either the unlock or lock buttons on the door for 5 seconds. Then all doors are locked and then unlocked when canceling operation is completed.

    I've tried pressing & releasing P before pressing and holding the lock or unlock buttons--also tried pressing & holding P while pressing and holding lock or unlock buttons. Also tried with power in accessory mode, and with car turned on. No luck.

    Has anybody been able to change these setting per the instructions in the owners manual? If so, any idea what I'm doing wrong?

    When I picked up my car I had them do the following customizations, which the owners manual says must be done by the dealer--could it be these dealer changes caused the auto lock/unlock function to not be owner changeable?

    Wireless remote unlocking operation—customized setting of “all doors unlocked in 1-stepâ€

    Unlocking using a key—customized setting of “all doors unlocked in 1-stepâ€

    Reverse warning buzzer—customized setting of “beeps onceâ€

    Seat belt reminder—customized setting of “OFFâ€
     
  2. HTMLSpinnr

    HTMLSpinnr Super Moderator
    Staff Member

    Joined:
    Dec 8, 2003
    5,341
    920
    251
    Location:
    Surprise, AZ (Phoenix)
    Vehicle:
    2018 Tesla Model 3
    Model:
    N/A
    I'll play later tonight if time permits. Are you waiting until a reaction or just 5 seconds? Sometimes their "5 seconds" can be a bit long ;)
     
  3. stream

    stream Senior Member

    Joined:
    May 12, 2008
    2,977
    452
    14
    Location:
    Long Island, NY
    Vehicle:
    2010 Prius
    Model:
    V
    I've tried both ways. :confused:
     
  4. Steve Cebu

    Steve Cebu New Member

    Joined:
    Apr 30, 2009
    523
    59
    0
    Location:
    Concord, NH
    Vehicle:
    2010 Prius
    Model:
    II
    I'm having the dealer make all the settings to my car, so that when I pick it up, it will all be done.
    But I can ask and see how it has to be done while I'm there.
    So you want to know how you (not the dealer) can manually change the setting to NOT unlock all the doors when you shift into Park, right?
     
  5. stream

    stream Senior Member

    Joined:
    May 12, 2008
    2,977
    452
    14
    Location:
    Long Island, NY
    Vehicle:
    2010 Prius
    Model:
    V
    Correct. The default setting it to lock all doors when shifting out of P, and unlock all when shifting into P. I want both auto settings turned off.

    TIA.
     
  6. Steve Cebu

    Steve Cebu New Member

    Joined:
    Apr 30, 2009
    523
    59
    0
    Location:
    Concord, NH
    Vehicle:
    2010 Prius
    Model:
    II
    I will be sure to ask. I won't have an answer for you until later tonight tho. I still have to get the car and snap some pics. I'm hoping I can get some pics at the Apple Orchard across the street from me.
    The apple trees are blooming so it would make a nice backdrop.
     
  7. dsviv

    dsviv Member

    Joined:
    May 17, 2009
    170
    11
    6
    Location:
    Eastern PA
    Vehicle:
    2010 Prius
    Model:
    IV
    In our 07 Corolla it uses basically the same method. It has 4 different modes. I found out that you have to start from scratch each time your try. In my case, put overhead light to DOOR, turn key to ON, wait for the overhead light to blink (1, 2, 3 or 4 times). To go to the next mode - start from scratch and do the procedure over again until you get to the mode you want. Hope this helps.
     
  8. Steve Cebu

    Steve Cebu New Member

    Joined:
    Apr 30, 2009
    523
    59
    0
    Location:
    Concord, NH
    Vehicle:
    2010 Prius
    Model:
    II
    I got my car today but the mechanic had gone home. I tried the settings myself but not a chance! Hopefully they can help me out with it tomorrow.
    It's really tough to set things yourself in this car.
    SKS is iffy, sometimes it will unlock all the doors other times it won't.
     
  9. stream

    stream Senior Member

    Joined:
    May 12, 2008
    2,977
    452
    14
    Location:
    Long Island, NY
    Vehicle:
    2010 Prius
    Model:
    V
    Update--took my car to Toyota Sunnyvale, and they reprogrammed the car, gratis, of course. Once again great customer service from my dealer.
     
  10. Zaxcom

    Zaxcom Member

    Joined:
    May 24, 2009
    114
    13
    0
    Location:
    NC
    Vehicle:
    2010 Prius
    Model:
    II
    I played with this for 1/2 hour and I finally figured it out. You do the opposite of the current system setting. If you want to turn the auto lock off you push the P and then the lock button. If you want to turn it back on you push the N and then the lock button.
     
  11. ddtaylor99

    ddtaylor99 dd taylor

    Joined:
    May 18, 2009
    25
    0
    0
    Location:
    cincinnati, oh
    Model:
    II
    Heres another door lock program question:

    Can you program it to UNLOCK ALL the doors at once when you hit unlock on the key fob (or the auto key fob or however it works.)?????

    I absolutley cannot stand this features that cars have now where they only unlock the driver door when you press unlock. You have to hit unlock TWICE to unlock the rest of the car. AHHHHHHHHHHHHHHHHHHH!

    (I dont think I could buy a car that did this)
     
  12. Zaxcom

    Zaxcom Member

    Joined:
    May 24, 2009
    114
    13
    0
    Location:
    NC
    Vehicle:
    2010 Prius
    Model:
    II
    I thought I had this figured out, but only got half of it.
    Now the doors dont lock at all either when you go into gear or get above 12mph. I did get them to unlock when i go into Park. If have tried every combination I can think off, but cant get them to lock.
     
  13. stream

    stream Senior Member

    Joined:
    May 12, 2008
    2,977
    452
    14
    Location:
    Long Island, NY
    Vehicle:
    2010 Prius
    Model:
    V
    Yes--I agree with you, and I did.

    To unlock all doors (instead of the default drivers only) with the remote, or using the mechanical key, the dealer needs to program that change. The default is you need to press the unlock button on the remote (or turn the mechanical key) twice.

    To change SKS so touching the drivers door opens all the doors, can be done by the owner using instructions in the owners manual.
     
  14. bk2k

    bk2k New Member

    Joined:
    Jun 7, 2009
    14
    9
    0
    Location:
    Vallejo, CA
    Vehicle:
    2010 Prius
    Model:
    II
    This is driving me nuts. When I try to do this I get no response from the car at all. Anyone have any helpful info?
    Thanks.
     
  15. stream

    stream Senior Member

    Joined:
    May 12, 2008
    2,977
    452
    14
    Location:
    Long Island, NY
    Vehicle:
    2010 Prius
    Model:
    V
    As I said I tried using the owners manual instructions--many times--with no luck. My advice is have the dealer do it.
     
  16. Steve Cebu

    Steve Cebu New Member

    Joined:
    Apr 30, 2009
    523
    59
    0
    Location:
    Concord, NH
    Vehicle:
    2010 Prius
    Model:
    II
    I have spent far too much time attempting it myself as well. The manual is obviously incorrect in some way.
    I wanted to change a few things but literally nothing changes, no matter what I do. I will have the dealer change them. I'm happy with the settings I now have except the headlights don't turn off with the car. That will be changed if possible.
    If you do find out how to change them please post here and I will do the same. I see the dealer on Thursday.
     
  17. IraS

    IraS Member

    Joined:
    May 15, 2009
    165
    50
    0
    Location:
    Austin, TX
    Vehicle:
    2010 Prius
    Model:
    V
    According to the owners manual, the default is for the headlights to turn off 60 seconds after you close the doors. This can be changed (by the dealer) to 0, 30, or 90 seconds.
     
  18. Steve Cebu

    Steve Cebu New Member

    Joined:
    Apr 30, 2009
    523
    59
    0
    Location:
    Concord, NH
    Vehicle:
    2010 Prius
    Model:
    II
    The owners manual is wrong then. I shut off the car and let it sit in the garage for over 5 minutes and the headlights were still on! :eek:
    I believe it is a dealer only setting and they said they will fix that at the same time they check my wheel alignment.
    The owners manual seems to have a lot of errors in it. :mad:
     
  19. bk2k

    bk2k New Member

    Joined:
    Jun 7, 2009
    14
    9
    0
    Location:
    Vallejo, CA
    Vehicle:
    2010 Prius
    Model:
    II
    OK, I have the auto door locking figured out. manual is wrong. You dont put the car to on you have to put it to ready.
    So you put the car to ready, push N or P (dont hold) then hold the driver door lock/unlock for 5 sec and let go. For the 5 sec count with the blinks of the : on the clock. If you did it right the doors will lock and unlock.

     
    2 people like this.
  20. stream

    stream Senior Member

    Joined:
    May 12, 2008
    2,977
    452
    14
    Location:
    Long Island, NY
    Vehicle:
    2010 Prius
    Model:
    V
    What does "put it to ready" mean?