1. Attachments are working again! Check out this thread for more details and to report any other bugs.

What's behind the rear bumper?

Discussion in 'Gen 2 Prius Main Forum' started by zenMachine, Aug 25, 2008.

  1. zenMachine

    zenMachine Just another Onionhead

    Joined:
    Mar 3, 2007
    3,355
    300
    0
    Location:
    Texas
    Vehicle:
    2007 Prius
    We got rear-ended at a stop light last weekend. The driver behind us thought the light had turned green so he went forward and rammed into our Prius. Luckily, his car is a Camry and his speed was pretty slow so the damage was relatively minor. The bumper got squished just enough to pop the rivets out on the two sides, and the lower lip of the rear hatch got bent just a little bit to where now you have to slam down pretty hard to close the hatch. Otherwise everything looks OK.

    Took the car to the body shop, the Toyota guy said they needed to examine behind the bumper to see if anything was damaged there.

    My question to our panel of experts: what IS behind that rear bumper???
     
    #1 zenMachine, Aug 25, 2008
  2. NaptownPrius

    NaptownPrius Getting Greener....

    Joined:
    Feb 21, 2008
    271
    7
    0
    Location:
    Napolis, Merlin
    Vehicle:
    2012 Prius
    Model:
    Three
    Exactly what happened to mine.

    They replaced the bumper...a piece of hard styrofoam absorber behind it...and two bent metal shock absorbing pieces. Sounds like it worked as advertised.

    Total cost about $1200.

    [​IMG]
    [​IMG]
     
    #2 NaptownPrius, Aug 25, 2008
  3. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,482
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    See attached .pdf file. Can the hatch be repaired or will it be replaced?
     
    #3 Patrick Wong, Aug 25, 2008
  4. TonyPSchaefer

    TonyPSchaefer Your Friendly Moderator
    Staff Member

    Joined:
    May 11, 2004
    14,816
    2,498
    66
    Location:
    Far-North Chicagoland
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Advanced
    I can tell you what's behind my back bumper: some jackass in a 4x4 pickup truck blaring country music and fixin' to reach for one of the rifles in his gun rack until his girlfriend stops his hand and says, "it ain't worth it Cletus, you've been savin' that last bullet for yer ex-wife."
     
    #4 TonyPSchaefer, Aug 25, 2008
  5. slair

    slair Ubër Senior Member

    Joined:
    May 11, 2007
    404
    0
    0
    Location:
    Lafayette, IN
    Vehicle:
    2005 Prius
    Right.
    Spot.
    On.
     
    #5 slair, Aug 26, 2008
  6. Qlara

    Qlara New Member

    Joined:
    Dec 18, 2007
    488
    5
    0
    Vehicle:
    2008 Prius
    That's suck to be rear-ended by a mindless driver.
    Looks like the rear has crumple slightly inward, thus the hatch got bent a little. Do they have to replace the rear hatch too or just 'fix' the bent?
     
    #6 Qlara, Aug 26, 2008
  7. zenMachine

    zenMachine Just another Onionhead

    Joined:
    Mar 3, 2007
    3,355
    300
    0
    Location:
    Texas
    Vehicle:
    2007 Prius
    The bent in the hatch is so slight that I didn't notice it at first. But the adjuster was experienced enough to immediately pop the hatch to look for it. Sure enough, the hatch wouldn't close properly when you let it drop down. I don't think it'll need to be replaced. The estimate is only like $1200.

    Strangely, he also put on the estimate sheet the cost for replacing the Toyota badge and emblem that I debadged long ago. I wonder if he thought they "fell off" from the hit, or if they needed to be replaced for advertising purposes. :)
     
    #7 zenMachine, Aug 26, 2008
  8. David Beale

    David Beale Senior Member

    Joined:
    Jul 24, 2006
    5,963
    1,985
    0
    Location:
    Edmonton Alberta
    Vehicle:
    2012 Prius
    Just so you know, it's not behind the "bumper". It's behind the "bumper cover". You will find the actual bumper behind the bumper cover. As posted above it consists of a Styrofoam block and a few bits of crumplable steel.
    Sounds like they did their job absorbing the forces, and preventing the body from being bent.
     
    #8 David Beale, Aug 26, 2008
  9. McShemp

    McShemp New Member

    Joined:
    Sep 16, 2005
    371
    4
    0
    Location:
    SA, TX
    Vehicle:
    2006 Prius
    Isn't there an SKS transmitter/sensor behind the bumper cover too? I seem to remember it needing to be replaced on my wife's Prius when it was rear ended.
     
    #9 McShemp, Aug 26, 2008
  10. hill

    hill High Fiber Member

    Joined:
    Jun 23, 2005
    20,173
    8,353
    54
    Location:
    Montana & Nashville, TN
    Vehicle:
    2018 Chevy Volt
    Model:
    Premium
    naw ... the SKS receiver is located back a bit farther. It's under the trunk, in there about 2 feet back, a tad towards the left as you're looking in
     
    #10 hill, Aug 26, 2008
  11. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,482
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    Well, hill is referring to the "Luggage Electrical Key Oscillator (Inner)" while McShemp is referring to the "Luggage Electrical Key Oscillator (Outer)"; or maybe the "Electrical Key Antenna (Rear)". See the attached .pdf for details.
     

    Attached Files:

    #11 Patrick Wong, Aug 26, 2008
  12. orracle

    orracle Whaddaya mean "senior" member?

    Joined:
    May 24, 2007
    441
    3
    0
    Location:
    Gurnee, IL
    Vehicle:
    2013 Prius
    Model:
    Two
    Considering where you and I live, Tony, another possibility is some Cheesehead looking for the Mall or Six Flags:D
     
    #12 orracle, Aug 26, 2008
  13. McShemp

    McShemp New Member

    Joined:
    Sep 16, 2005
    371
    4
    0
    Location:
    SA, TX
    Vehicle:
    2006 Prius
    It was the Electrical Key Antenna (Rear). Anyway, the accident caused about $1400 in damages without needing to tweak the rear hatch (whew!).
     
    #13 McShemp, Aug 26, 2008
(You must log in or sign up to post here.)