1. Attachments are working again! Check out this thread for more details and to report any other bugs.

SCC1 + TOY-SC1 display issue

Discussion in 'Gen 2 Prius Audio and Electronics' started by sincitymedic, Jun 11, 2008.

Page 2 of 2
  1. Rest

    Rest Active Member

    Joined:
    Aug 13, 2005
    1,210
    53
    2
    Location:
    CA
    Vehicle:
    2007 Prius
    Didn't you read the post above yours?
     
    #21 Rest, Jun 13, 2008
  2. alanh

    alanh Active Member

    Joined:
    May 22, 2007
    1,175
    99
    0
    Location:
    Phoenix, AZ
    Vehicle:
    2007 Prius
    No, you don't need all three. You need either SCC1 (which is a Sirius tuner with its own serial number) or SCVDOC1 plus your own compatible receiver. You need the TOY-SC1 adapter to connect either to the Toyota's stereo system.
     
    #22 alanh, Jun 13, 2008
  3. Hryb

    Hryb electic

    Joined:
    Mar 27, 2006
    81
    1
    0
    Location:
    NW
    Vehicle:
    2007 Prius
    I have had these units connected in my car for about 10-days. No problems at all with the display. I am set to scrolling though. I'll call a friend of mine who works at Sirius and ask him if he's heard of this issue.
     
    #23 Hryb, Jun 15, 2008
  4. srickard

    srickard New Member

    Joined:
    Dec 11, 2007
    5
    0
    0
    Location:
    Sachse, TX
    Vehicle:
    2008 Prius
    I believe this is a problem in the radio, not the Sirius stuff. I have seen a similar problem on the audio display for FM. Recently I took a trip several hundred miles away from home. One of my presets matched the frequency of a different station. The station info was updated on the display. When I returned home the station info did not change back until I reset the preset. :rolleyes:
     
    #24 srickard, Jun 20, 2008
(You must log in or sign up to post here.)
Page 2 of 2