New Audiovox 5600 SmartPhone

I just picked up the new Audiovox 5600 SmartPhone last night, So far here is what I have found out.

It does not display the Signal Strength of your cell but displays the signal type (e.g. Digital) and the bluetooth connection strength.

It only rings on the phone, maybe. I have to play around with some of the profile settings still.

You can only sync 1 contact at a time.
And the contacts I have to play with because the phone syncs with Outlook for all its information and in Outlook the phone numbers are +1(XXX) XXX-XXXX and for what ever reason when I tried to send a contact to the car, it took but came out +1|||||||||||||. I am going to try and take out the () to see if thats what is killing it.

The responce is very quick and the phone is very clear.

I have the Sony Ericsson T610 & the T637 which both worked well but wanted a SmartPhone and the Audiovox is the smallest footprint SmartPhone out there. All of my phones have been with AT&T Wireless which is great as long as you have a GSM phone.

I will keep you up to date with what I find whith using this phone.

 

OK here we go.

The problem of not transfering the number from my smrtphone to the car was caused by not only the () for the area code but also the - between the exchange and the rest of the number. Once I took that out it worked fine. SO I just have to make sure that Outlook does not add the () and - in the numbers.

This phone has the same issue as most phones, multiple numbers for a single contact so it transfers the first one which happens to be the Home #, then Mobile and then Work.

I am able to transfer a call from the car to the phone when I get out of the car by releasing the handsfree mode. Same with getting in the car, once the bluetooth syncs I can tranfer the call to the car.

So far so good, I have not had any problems with AT&T or the phone. Alot of very cool features.

 

So far so good....
The bluetooth connection is fine. Once you get past the problem with how outlook stores phone numbers by default everything works great.
The car does not ring but only really 1 or 2 phones do that anyway.

 

The voice tags were pulled during the mfg process but was left in the book. I verified this thru Toyota after weeks of going back and fourth with them. To the point I actually talked with and Engineer who told me they yanked that feature but the books were already printed.

 

You can still use the voice tags on your mobile phone itself to dial, which will then be picked up by the car, but there was to be voice commands for dialing in the car itself which were taken out.

 

Techogurl
All you need to do is make sure bluetooth is activated on the phone and follow the instructions in the user guide for the car.

Lazybear
I am not sure whats wrong with your phone but I have not seen that yet. My work gave me this phone, we have 20 of them and I have never seen them hang or take a mintue to boot up or on shutdown.
The ringer volume has never been a problem even with the default ring tones. What ringtones are you using?