ScanGageII Prius scan codes

My understanding was that the SOV and BTV was for the Hybrid battery pack. I haven't added the codes to my SG2 with the new firmware yet. Have you tried re-entering the code?

 

<div class='quotetop'>QUOTE(Bill-psi @ Oct 28 2007, 03:56 AM) [snapback]531509[/snapback]</div>

Works fine on my '07. I would try re-entering the code. Maybe it just didn't take for some reason. In any event I find it only mimics the SOC anyway, so I no longer monitor it.

 

I just added SOC and BVT to the SG2 in my 2007 Prius and I also am showing a blank BTV.

 

<div class='quotetop'>QUOTE(Neicy @ Oct 28 2007, 07:33 AM) [snapback]531524[/snapback]</div>

Ditto. It works fine for me. BTV is not completely like the SOC. It changes more quickly. For example, if you jam on the throttle in reverse (big battery drain) BTV drops (and comes back up when you let up). If you step on the brakes it spikes. I think the measurement is being made in the engine compartment, so you are seeing the voltage drop across the cables. Or perhaps the measurement is made in the trunk but you are seeing internal resistance. In any case, BTV moves around a lot faster than SOC, but I agree that the steady state BTV value mimics the SOC.

Another odd thing. The lowest digit in BTV flickers constantly. Almost as though there were a loose connection. I suppose the battery voltage is constantly fluctuating, but I'm surprised the SGII/Prius Computer samples it that fast!

<div class='quotetop'>QUOTE(Rest @ Oct 28 2007, 06:54 PM) [snapback]531699[/snapback]</div>

Please check EXTREMELY carefully. I messed up a couple times, either putting in the number from the line above in the table, or just skipping a digit. BVT definitely works on the 2007 model.

 

I have checked the numbers three times and they are correct.

TXD - 0033
RXF - 0100023B0000
RXD - 2010
MTH - 000100010000

BTV is still not working.

 

I emailed Linear Logic, but have yet to get reply from them about this. I also re-entered the codes for BTV 3 times today, even entered thim in a different memory slot. Still nothing showing up.

Bill-psi, have you had any luck?

 

My 2007 Prius is an early 07 model. Those of you that got BTV to work in a 2007, was your Prius an early model?

 

<div class='quotetop'>QUOTE(Rest @ Oct 31 2007, 11:27 PM) [snapback]533246[/snapback]</div>

Mine works on my '07 touring bought in Feb. '07 - that doesn't sound like an early one. I'm beginning to think that maybe some of the units didn't get the complete upgrade before being shipped, since this is a problem with multiple people. I hope Linear Logic addresses this issue soon.

 

I sent my SG2 back to Linear Logic for the firmware update, it's 3.15 so mine should work but it isn't.

 

Mine is a late 2006 and the codes work just fine on them. Not bragging, just more fodder for the fire.

 

Mine is a 2007 and I just installed the ScanGuage II, the codes work.

 

Well this interesting. I finally got a reply from Linear Logic, they say it should work. I don't understand it but I can't help but wonder if when they installed my firmware upgrade it got messed up somehow.

What other gauges do those of you that got it to work, do you have showing along with the BTV gauge?

 

<div class='quotetop'>QUOTE(Rest @ Nov 1 2007, 02:51 PM) [snapback]533578[/snapback]</div>

I have RPM, Coolant Temp SOC and BTV.

I have a late 2006, package 7 I guess since I don't have leather, it has everything else though. The wife specifically asked for "no leather" but loaded.

Maybe the package you have makes a difference?

 

<div class='quotetop'>QUOTE(bhaynnes @ Nov 2 2007, 09:03 AM) [snapback]533909[/snapback]</div>

Not sure why it would make a difference, but we have everything except leather seats.

 

<div class='quotetop'>QUOTE(Rest @ Nov 2 2007, 05:51 PM) [snapback]534098[/snapback]</div>

Exactly what I have and BTV works ok. I also display it with RPM, Temp, and SOC. I got my non-Touring model in August

 

I have a 2008 Prius. SOC, BTV, & BTA all work fine. Please note, that the SOC, "State of Charge" cannot be displayed at the same time as either of the others. If you take the SOC off the screen when the BTV & BTA is on there, the SOC works fine. Whichever was on the screen first will work, the others will not. This was given to me by Linear Logic on their data sheet, also posted on the Website. I verified this today in a real world test. Hope this helps you.