Beeping when using Smart Key for unlocking

If SmartKey is enabled, just walk up to the car and open the door. It will open if you have your key fob with you; no need to push the button. Hit the black button after exiting, and the car is locked.

See if it still beeps when you open it like that.

 

<div class='quotetop'>QUOTE(spacey_ts @ Aug 24 2007, 01:53 PM) [snapback]501605[/snapback]</div>

Only to lock the car. To unlock, just grab the door handle.

Tom

 

...and don't use the inside lock button. Just turn off the car, get out, close the doors, and press the external black lock button on the door handle. Then walk away.

 

<div class='quotetop'>QUOTE(mgipe @ Aug 24 2007, 01:13 PM) [snapback]501624[/snapback]</div>

Why? What's the difference between locking using the button on the inside vs outside?

 

For me, the difference between using the inside & the outside lock button is that if a door is ajar, Fiona will let me know by "screaming" at me if I push the black button. No such warning with the inside lock button.

 

<div class='quotetop'>QUOTE(zenMachine @ Aug 24 2007, 11:24 AM) [snapback]501637[/snapback]</div>

Mainly, that's the way Toyota designed it.

The inside button locks the doors. The outside button locks the doors, checks for power off, checks for open doors, checks for keys left inside, and sets the alarm.

 

<div class='quotetop'>QUOTE(mgipe @ Aug 24 2007, 06:10 PM) [snapback]501792[/snapback]</div>

Good points!

I don't consistently use one method or the other, though I prefer the immediacy and tactile feel of the inside button more. But the safeguards provided by the outside button are well worth it.

 

<div class='quotetop'>QUOTE(zenMachine @ Aug 25 2007, 12:22 AM) [snapback]501890[/snapback]</div>

I always lock by pushing one of the little black buttons on the outside of the car. I do this even in our little village where I never lock anything else, only to make sure there are no doors left ajar.

For the OP, I want to point out that unlocking by grabbing a door handle only works with the front doors and the hatch. The default behavior is to unlock all of the doors when unlocking by the passenger door or hatch, and only the driver's door when touching that handle. You can change this behavior by doing a little setup with the key fob. It's spelled out in the manual and also on this site.

Another subtle point is that the unlockers on the front doors are touch sensitive, while the one on the hatch is pressure sensitive. When you unlock with either of the front doors, all you have to do is touch the inside of the handle and the car will unlock. With the rear hatch, you have to apply some pressure and wait for a short interval before it unlocks. This prevents rain and wind turbulence from messing with the rear hatch control. With the SKS, sometimes you will notice the door locks cycling when you wash your car. This is from water tripping the touch sensors on the front door handles. Either ignore it, or temporarily turn off the SKS system by pushing the button under the steering wheel.

Tom