I'm hoping someone out there that has put these in can help. The bottom half of the front bucket cover has three straps a velcro strap that goes left to right and two straps with buckles the go front to rear. There does not seem to be a way to pass the buckle between the top and bottom halves of the seat so that the straps from the front can be passed thru the buckles (underneath the seat) to be tightened. What am I missing?
<div class='quotetop'>QUOTE(mrohde @ Jul 14 2007, 11:22 AM) [snapback]478700[/snapback]</div> A very limber body and fingers. Took me a while to get it, but I got it. I had problems with the back seat.
<div class='quotetop'>QUOTE(mrohde @ Jul 14 2007, 02:22 PM) [snapback]478700[/snapback]</div> pkittie For a very detailed description on the installation go to the "Care Maintance & Troubleshooting" Forum and look up post "Seat Cover Review". It is very complete and with pictures. For the front seat straps unhook the factory cover where it attaches with "S" hooks under the seat. My grandsons installed mine for me a couple of days ago and they look and fit great.
