1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Three Mods Same Day = a Very Good Day Indeed

Discussion in 'Gen 2 Prius Accessories & Modifications' started by Prudence, May 5, 2007.

  1. Prudence

    Prudence New Member

    Joined:
    Mar 14, 2007
    109
    0
    0
    Location:
    Hudson Valley
    Vehicle:
    2007 Prius
    1) My husband took the Prius to an auto body shop this morning and they installed the side body moldings for $26. My husband offered to do it, but I would rather be upset with the shop than with him if I didn't like it, and the price was right. They billed a half hour. I made the arrangements with the shop and took the dog to obedience class while he took the Prius in for me. The shop did a nice job and they look great.

    2) Back at home the afore mentioned wonderful spouse pulled the car onto ramps, blocked the back wheels and put on the BT plate, a 15 minute job. I'll let you know. ;)

    3) Spouse (now gaining hero status) put in the EBH while the Prius was on the ramp and while I got my hair cut, so I missed being there. I was told I didn't miss anything. :unsure: It took him about 50 minutes and he had to take the plug off in order to line up with the hole. And then plug it back in, remembering the orientation. A trip to Home Depot found a 15 foot extension cord and a heavy duty outdoor timer made for pool pumps and...engine block heaters.

    It's nice to get things done.
     
    #1 Prudence, May 5, 2007
  2. PHanna

    PHanna Junior Member

    Joined:
    Apr 29, 2007
    29
    0
    0
    Would love to see pics of the body side mouldings. Sounds like a good Prius day to me!
     
    #2 PHanna, May 5, 2007
  3. Prudence

    Prudence New Member

    Joined:
    Mar 14, 2007
    109
    0
    0
    Location:
    Hudson Valley
    Vehicle:
    2007 Prius
    <div class='quotetop'>QUOTE(EarthCare @ May 5 2007, 08:59 PM) [snapback]436197[/snapback]</div>
    Here's a picture of the molding and a couple of the EBH plug. I didn't wax the car doors again, it was 60 degrees today, but it's suppose to be in the upper 70's tomorrow, so I'll wait until then. B)

    Body side molding:
    [​IMG]

    EBH plug in grill and the extension cord:
    [​IMG][​IMG]
     
    #3 Prudence, May 6, 2007
  4. hobbit

    hobbit Senior Member

    Joined:
    Mar 23, 2005
    4,089
    468
    0
    Location:
    Bahstahn
    Vehicle:
    2004 Prius
    Model:
    N/A
    Ah, you ran the cord over *that* way. Did you/he do the install
    from the top or the bottom? [I.e. speak to us about "preferred
    positions with your Prius", or something...
    .
    _H*
     
    #4 hobbit, May 6, 2007
  5. Prudence

    Prudence New Member

    Joined:
    Mar 14, 2007
    109
    0
    0
    Location:
    Hudson Valley
    Vehicle:
    2007 Prius
    <div class='quotetop'>QUOTE(hobbit @ May 6 2007, 09:22 PM) [snapback]436587[/snapback]</div>
    :huh: He preferred the bottom. ;)
     
    #5 Prudence, May 6, 2007
  6. priusFTW

    priusFTW Gen III JBL non Nav

    Joined:
    Jan 12, 2007
    434
    8
    0
    Location:
    White Mtns New Hampshire
    Vehicle:
    2011 Prius
    Model:
    Three
    ;) <div class='quotetop'>QUOTE(Prudence @ May 6 2007, 09:31 PM) [snapback]436590[/snapback]</div>

    Nice job! now get your windows tinted and a clear bra installed on the hood and front bumper...
     
    #6 priusFTW, May 7, 2007
  7. finman

    finman Senior Member

    Joined:
    Apr 9, 2004
    1,287
    111
    0
    Location:
    Albany, OR
    Vehicle:
    2014 Nissan LEAF
    <div class='quotetop'>QUOTE(priusFTW @ May 7 2007, 10:27 AM) [snapback]436801[/snapback]</div>
    Are we still talkin' Prius mods...uh...I'm not sure, ha, ha!
     
    #7 finman, May 7, 2007
  8. JimboK

    JimboK One owner, low mileage

    Joined:
    May 1, 2006
    2,817
    187
    49
    Location:
    Chesterfield, VA
    Vehicle:
    2005 Prius
    <div class='quotetop'>QUOTE(Prudence @ May 6 2007, 09:31 PM) [snapback]436590[/snapback]</div>
    :lol: :lol: :lol:
     
    #8 JimboK, May 7, 2007
  9. geekforums

    geekforums New Member

    Joined:
    May 4, 2007
    23
    0
    0
    Location:
    Wilmington, DE. U.S.A.
    <div class='quotetop'>QUOTE(Prudence @ May 5 2007, 07:50 PM) [snapback]436187[/snapback]</div>
    You Husband Is Giving The Rest Of Us Husbands A Bad Rep... :lol: ... Didn't Know There Were Such Dirty Minds On PC :lol: How do you like the EBH? Do you have additional pix of the install? How much was the EBH & where did you purchase? Thanks! Body Side Moldings Are On My "TO DO" List...
     
    #9 geekforums, May 9, 2007
  10. Prudence

    Prudence New Member

    Joined:
    Mar 14, 2007
    109
    0
    0
    Location:
    Hudson Valley
    Vehicle:
    2007 Prius
    <div class='quotetop'>QUOTE(geekforums @ May 9 2007, 07:40 AM) [snapback]438158[/snapback]</div>
    Don't worry about a bad rep...my guy has a sailboat that he spends lots of time on, so he's getting bonus points to bank. :D

    The EBH is making a difference in the morning, it's been 38-52 in the mornings this week. I got it at Metro in Cleveland for $56 and shipping, I think the price has gone up on that site. Sorry I don't have a link for the site, but someone on here will. :)

    With the body side molding, I'm not as paranoid about someone opening their door and hitting my car, but I'm still parking away from everyone when I can.
     
    #10 Prudence, May 9, 2007
  11. geekforums

    geekforums New Member

    Joined:
    May 4, 2007
    23
    0
    0
    Location:
    Wilmington, DE. U.S.A.
    <div class='quotetop'>QUOTE(Prudence @ May 9 2007, 09:07 AM) [snapback]438178[/snapback]</div>
    Thanks for the info! :D My wifes scion xb is always getting dinged.. I might have to get moldings for her car soon...
     
    #11 geekforums, May 9, 2007
  12. Prudence

    Prudence New Member

    Joined:
    Mar 14, 2007
    109
    0
    0
    Location:
    Hudson Valley
    Vehicle:
    2007 Prius
    Here's the link for the EBH
     
    #12 Prudence, May 9, 2007
  13. PHanna

    PHanna Junior Member

    Joined:
    Apr 29, 2007
    29
    0
    0
    <div class='quotetop'>QUOTE(Prudence @ May 9 2007, 03:32 PM) [snapback]438454[/snapback]</div>
    Thanks for the link. I ordered the EBH, Body Side Molding, and the Rear Bumper Applique today! Do you think the side molding will reduce miles per gallon?
     
    #13 PHanna, May 14, 2007
  14. Rest

    Rest Active Member

    Joined:
    Aug 13, 2005
    1,210
    53
    2
    Location:
    CA
    Vehicle:
    2007 Prius
    I have never liked side molding on vehicles and can't say I like them on the Prius either. I am curious though about the EBH. I wonder if they are cost effective and counter productive to the Prius theme of being green. I does afterall use power from your house. And how easy was the install? Where I live cold mornings are not that often so I'm not sure if the EBH is for me.
     
    #14 Rest, May 17, 2007
  15. mjms2b

    mjms2b MJ Green

    Joined:
    May 8, 2007
    349
    3
    0
    Location:
    Socal
    Vehicle:
    2007 Prius
    GEEZ, I saw the yellow cord and all the talk of an EBH, I thought it was some fancy toy that I didn't have yet. .......I live in California, I'm pleased to realize that not only do I not have it, I don't need it, LOL
     
    #15 mjms2b, May 17, 2007
  16. NoMoShocks

    NoMoShocks Electrical Engineer

    Joined:
    Jan 21, 2007
    1,292
    82
    11
    Location:
    Camas, WA
    Vehicle:
    2010 Prius
    Model:
    IV
    <div class='quotetop'>QUOTE(Prudence @ May 5 2007, 04:50 PM) [snapback]436187[/snapback]</div>
    Sounds like hubby was already to obediance school before the dog. I think you should give him a treat to reinforce the good behavior.
     
    #16 NoMoShocks, May 17, 2007
  17. Prudence

    Prudence New Member

    Joined:
    Mar 14, 2007
    109
    0
    0
    Location:
    Hudson Valley
    Vehicle:
    2007 Prius
    <div class='quotetop'>QUOTE(NoMoShocks @ May 17 2007, 03:01 AM) [snapback]443988[/snapback]</div>
    After 33 years of marriage, we're both well trained in our own ways. :p

    Your welcome, glad I could help. I don't know if the side molding reduces mileage, since the mods were done at the same time, the weather is warmer and the car is still breaking in. I do know my last tank was 54mpg. :)

    I like the looks, but more importantly, my last car had the same style door as the Prius and seemed to invite dents from other car doors opening on it, no matter how carefully I parked. As for the EBH, do a search, there is a ton of info on them from the "experts". :)

    Must be nice.... B)
     
    #17 Prudence, May 19, 2007
  18. sleeka

    sleeka Member

    Joined:
    Apr 26, 2005
    249
    10
    0
    Location:
    Brisbane. Australia.
    Vehicle:
    2009 Prius
    Model:
    V
    Your welcome, glad I could help. I don't know if the side molding reduces mileage, since the mods were done at the same time, the weather is warmer and the car is still breaking in. I do know my last tank was 54mpg. :)


    I like the looks, but more importantly, my last car had the same style door as the Prius and seemed to invite dents from other car doors opening on it, no matter how carefully I parked. As for the EBH, do a search, there is a ton of info on them from the "experts". :)


    Must be nice.... B)
    [/quote]

    Hi from Australia....regarding the side mouldings, I prefer to fit them on the outermost part of the door, where it is most likely to protect from other idiots. This is a little higher than detailed on the fitting instructions which come in the kit. They work well there....see photo. Oh, and there is no way they could affect fuel mileage.

    Thankfully, we don't need the EBH either, just the opposite! A little rain would be nice though. We are in our worst drought in living memory.

    Cheers.
    [attachmentid=8156]
     

    Attached Files:

    #18 sleeka, May 19, 2007
(You must log in or sign up to post here.)