Anyone know why my high beams work but my low beams dont?

Discussion in 'Prius v Care, Maintenance and Troubleshooting' started by RayLepson, Feb 24, 2025 at 9:12 PM.

  1. RayLepson

    RayLepson New Member

    Joined:
    Monday
    3
    0
    0
    Location:
    Maryland
    Vehicle:
    2012 Prius
    Model:
    V
    Both low beams won't come on. I checked the fuse for the low beams, but the fuse looks ok. Not sure where to go from here. Any help would be appreciated. Thanks.
     
  2. rjparker

    rjparker Tu Humilde Sirviente

    Joined:
    Jun 6, 2008
    9,064
    5,489
    7
    Location:
    Texas Hill Country
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    odds are good both low beams are burned out.
     
    Brian1954 likes this.
  3. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    25,546
    16,690
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    Where did you find a fuse for the low beams? I think of v and gen 3 liftback being similar, and gen 3 doesn't have one, but maybe v does.

    Gen 3 liftback has a long white 'integration relay' that powers both low beams and a bunch of other things, and one 40 amp fuse on the supply to that. If that one fuse went open, a bunch of things would stop working.
     
  4. rjparker

    rjparker Tu Humilde Sirviente

    Joined:
    Jun 6, 2008
    9,064
    5,489
    7
    Location:
    Texas Hill Country
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    Chapman is right, the low beams are just a 40 amp as shown below
    IMG_7649.jpeg
    Each low beam has a separate ground so grounding problems are unlikely.


    The high beams have their own fuses but in your case they are good.
    IMG_7650.jpeg

    What does happen is one low beam bulb burns out (H11 type) but it goes unnoticed until the other fails.
     
    Brian1954 likes this.
  5. RayLepson

    RayLepson New Member

    Joined:
    Monday
    3
    0
    0
    Location:
    Maryland
    Vehicle:
    2012 Prius
    Model:
    V
    Because both were out, I didn't consider that a possibility. I'll get a couple new bulbs and try it. Thanks!
     
  6. RayLepson

    RayLepson New Member

    Joined:
    Monday
    3
    0
    0
    Location:
    Maryland
    Vehicle:
    2012 Prius
    Model:
    V
    RJParker, I'll go with the new bulbs and see how that goes.

    The fuse for the low beams is, I believe fuse 20. It is clustered with two other fuses. All were in good condition.

    Thanks to everyone who replied. I appreciate it!
     
  7. MAX2

    MAX2 Active Member

    Joined:
    Aug 12, 2024
    718
    211
    43
    Location:
    Third planet from the Sun
    Vehicle:
    2007 Prius
    Model:
    N/A
    It remains to be seen whether the car has a DRL module or not. If the module is faulty, then voltage will not reach the lamps.