Hi everyone, I just installed a compustar CM-DC3 in my prius prime with takeover. Relatively easy install with the guide from firstechs website. I'm curious if anyone else has a fix for this. My prius does not remote start in ready mode and I've noticed from scouring the forums that people who've had this setup installed they actually do launch in ready mode upon startup. The one setting i'm curious about is I chose the option for assumed start(for hybrids) and maybe I should try Data tach instead since compustar claims this supports "tach monitoring". Secondly, struggling to program the compustar two way remotes so if anyone has experience there on their prius/prius prime please chime in. I attached the install instructions. Also, thought I'd add the Rav 4 prime installation: which I find quite a bit interesting as they tap into a HV/EV wire in the ECU. Thanks again!