Just need to vent...

Discussion in 'Fred's House of Pancakes' started by Mendel Leisk, Jul 6, 2022.

  1. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    25,099
    16,365
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    You can get some serious growth going for you even with limits on what you annually put in.

    You can only put 4 odd thousand a year into a health savings account. That's great if you start one early in your career.

    I had an employer that jumped on the HDHP+HSA bandwagon late in my career, making it not very easy to grow any useful amount in the account (even compared to one year's possible deductible!).

    Still, there were ways at least to make best use of the situation. The employer offered to put in a few hundred a year, and I could elect an amount to deduct from each paycheck, though it all had to add up to less than the yearly limit by the end of the year.

    For the first few years I set the monthly paycheck deduction at zero, and instead wrote one check early in the year to the HSA account, for the yearly limit minus the employer contribution. That way I could have the maximum possible amount earning growth the whole year, instead of small monthly amounts dribbling in. The first year, that also meant I immediately reached the threshold for putting the account funds in better investments than the HSA custodian's tiny interest rate.

    Didn't take very long before the HSA itself could earn more in a year than what the employer was contributing, and it just kept improving from there.
     
    Isaac Zachary likes this.
  2. ETC(SS)

    ETC(SS) The OTHER One Percenter.....

    Joined:
    Oct 28, 2010
    7,902
    6,693
    0
    Location:
    Redneck Riviera (Gulf South)
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    I did that to point out the fact that "living wages" - aren't.
    It sets an artificial floor but not an artificial ceiling.

    The minimum wage here is $7.25...but that's not the real-world minimum wage at any of the fast food joints (we have most of them) big box stores (we have most of those too,) or mom-and-pop operations.
    Eggs are cheaper in the country - AND so are taxes, housing, etc....
    Although I DID pay nearly $5 for 'hen-berries' just yesterday.
    Location
    Location
    Location.

    I get it.
    Colorado is a pretty place, but if it's expensive to live there you have to work harder or smarter.
    Work-life balance makes working more than 40 hours a week 'harder' but not impossible. Ask any veteran.
    Education isn't the end all be all of having a successful career. I got my last two jobs on the strength of being an Electronics Tech, with a clearance (which means only no felonies to my present employer) after 11 years of active duty.

    You're over 50.
    I get that too.
    So am I.
    I am becoming more and more sympathetic with people who are forced to retire before 70!

    You have the RIGHT to vent about it, which is the point of this thread, but you also have the privilege to enjoy your friends, family, home town, etc....
    Hope you retire happy!!

    If you're still in your 50's you still have a LOT of rudder input over that!!
     
    Isaac Zachary likes this.
  3. Isaac Zachary

    Isaac Zachary Senior Member

    Joined:
    Jan 20, 2018
    2,139
    1,008
    1
    Location:
    USA
    Vehicle:
    Other Hybrid
    Model:
    N/A
    :ROFLMAO: Did you mean "after" 70? :ROFLMAO:

    It's also not just cost to income to balance. It's also willing to accept less. :cool:
    • For an example, we live in the cheapest rent in town, a small mobile home. ;)
    • We hardly ever eat food that wasn't made from scratch, including food from our garden. (y)
    • We don't get ski tickets or go to movies. :sneaky:
    • We usually own only one car. :D
    • We don't have any subscriptions except a Microsoft 365 Office subscription that I'm planning on canceling. :)
    • I'm even contemplating canceling our $30/mo internet service because I'm possibly spending too much time on Priuschat and don't really see much benefit in having internet for other things. It's just a way to get ads to buy more stuff and an easy way to just buy that stuff in the ads. :whistle: I can get the internet at places like the library when in need.
    • If I did own y own home and had health insurance and a retirement plan I'd still live the same way I do now and give my extra money to charity.
    Thanks for listening to me vent :mad:o_O:notworthy::LOL::eek::barefoot:

    I just hope my family is happy and that I've made my community a better place... with or without my retirement or health care. :coffee:
     
    ETC(SS) likes this.
  4. Mr.Vanvandenburg

    Mr.Vanvandenburg Senior Member

    Joined:
    Mar 15, 2007
    1,267
    485
    0
    Vehicle:
    2020 Prius Prime
    Model:
    Limited
    Post Office? Maybe someone will retire. My daughter is single and a family income can be higher and still be on the lower premium tiers. I don’t know why hers is what it is but she still says it’s too high. Hers may be a little less income, but I know the gross is about like yours. On another note, she pays uncle sam her withholding deduction and gets just a tiny refund.
     
  5. Isaac Zachary

    Isaac Zachary Senior Member

    Joined:
    Jan 20, 2018
    2,139
    1,008
    1
    Location:
    USA
    Vehicle:
    Other Hybrid
    Model:
    N/A
    I'm positive I'll find a job that I'll like. I'm looking at an ad for a city job that looks like just came out today as a shop technician that has full benefits and looks like may start out at a salary of more than I make now plus full benefits, such as a matched 401k. And the good thing is I already have all the requirements for the job including many of ones that they say "must be willing to obtain" such as a commercial driver's license, mechanic experience and valid 1st aid and CPR training.
     
  6. John321

    John321 Senior Member

    Joined:
    Nov 16, 2018
    1,303
    1,296
    0
    Location:
    Kentucky
    Vehicle:
    2008 Prius
    Model:
    Two
    Mike that is a great retirement plan you've put together.
    One time we had a Representative from Fidelity come talk to us about retirement at work - it was a required training module when you got hired. He told us there is no substitute for compounding and getting started investing in your 401k early on- letting that money compound over the next 30 to 40 years.
     
    ETC(SS) and Isaac Zachary like this.
  7. ETC(SS)

    ETC(SS) The OTHER One Percenter.....

    Joined:
    Oct 28, 2010
    7,902
    6,693
    0
    Location:
    Redneck Riviera (Gulf South)
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    He's right!
    That's why we're here!
     
    Isaac Zachary and Merkey like this.
  8. Mendel Leisk

    Mendel Leisk Witness Leader

    Joined:
    Oct 17, 2010
    57,126
    39,446
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Trying to open a new jar of jam this morning, just about ready to take it to a machine shop. Oil filter wrench involved, had the missus hold the jar while I "tried" to turn, then we'd switch. Ran lid under hot water, taps. Missus was convinced counter-clockwise was tightening it, lol. Anyway, it FINALLY budged, but seriously? Might try emailing the maker.


    IMG_6112.jpeg
     
  9. cyberpriusII

    cyberpriusII Prodigyplace says I'm Super Kris

    Joined:
    Oct 1, 2009
    1,139
    1,626
    0
    Location:
    Iowa
    Vehicle:
    2008 Prius
    Model:
    N/A
    "Pointy" end of what my dad called a "church key" (1950s era and has Pabst Blue Ribbon on it).

    Poke it under bottom edge of lid, pry to release vacuum.

    upload_2024-12-1_11-7-47.jpeg
     
    Mendel Leisk likes this.
  10. hill

    hill High Fiber Member

    Joined:
    Jun 23, 2005
    20,305
    8,419
    54
    Location:
    Montana & Nashville, TN
    Vehicle:
    2018 Chevy Volt
    Model:
    Premium
    This is the electric age the land of high torque;

    Screenshot_2024-12-01-12-13-17-73_965bbf4d18d205f782c6b8409c5773a4.jpg

    .
     
    Mendel Leisk likes this.
  11. bwilson4web

    bwilson4web BMW i3 and Model 3

    Joined:
    Nov 25, 2005
    27,746
    15,702
    0
    Location:
    Huntsville AL
    Vehicle:
    2018 Tesla Model 3
    Model:
    Prime Plus
    Screw driver and hammer (side of meat tenderizer.) Treat a stuck lid with the proper amount of disrespect. You can always put a sandwich bag or plastic wrap over the mouth.

    Bob Willson
     
  12. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    25,099
    16,365
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    Counter-vent:

    Without meaning to, I've just laundered $1.37 worth of change in a front-loader.

    With the exception of one penny, all of the coins finished the cycle lined up neatly in the fold of the rubber door gasket, gleaming at me like a ceremonial display when I opened the door.
     
    ETC(SS) likes this.
  13. dbstoo

    dbstoo Senior Member

    Joined:
    Oct 7, 2012
    1,369
    736
    0
    Location:
    Near Silicon Valley
    Vehicle:
    2024 Prius Prime
    Model:
    XSE Premium
    Be careful when using the can opener that way. It's possible to fracture the edge of the jar, resulting in invisible glass shards in the otherwise transparent jelly or pickle juice.

    In the 1970's my dad did exactly that with a jar of open and go "shrimp cocktail". Emergency surgery was required to remove the scimitar shaped sliver of glass from his intestine.
     
    Mendel Leisk and hill like this.
  14. Isaac Zachary

    Isaac Zachary Senior Member

    Joined:
    Jan 20, 2018
    2,139
    1,008
    1
    Location:
    USA
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Helping a friend fix his car he got for "a good deal". Like anything under $15,000 anymore:
    • Trying to remove the wheel bearing one of the bolts backed out then got stuck.
    • Moved to removing steering knuckle. Got the nuts off the two main bolts from steering knuckle to strut, but now the bolts won't come out, the rust has welded them in place.
    • Moved to removing strut and A arm. Both have bolts that have snapped off.
    • Now trying to figure out how to replace all this.
     
  15. Isaac Zachary

    Isaac Zachary Senior Member

    Joined:
    Jan 20, 2018
    2,139
    1,008
    1
    Location:
    USA
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Helping a friend fix his car he got for "a good deal". Like anything under $15,000 anymore:
    • Trying to remove the wheel bearing one of the bolts backed out then got stuck.
    • Moved to removing steering knuckle. Got the nuts off the two main bolts from steering knuckle to strut, but now the bolts won't come out, the rust has welded them in place.
    • Moved to removing strut and A arm. Both have bolts that have snapped off.
    • Now trying to figure out how to replace all this.
     
  16. Isaac Zachary

    Isaac Zachary Senior Member

    Joined:
    Jan 20, 2018
    2,139
    1,008
    1
    Location:
    USA
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Helping a friend fix his car he got for "a good deal". Like anything under $15,000 anymore:
    • Trying to remove the wheel bearing one of the bolts backed out then got stuck.
    • Moved to removing steering knuckle. Got the nuts off the two main bolts from steering knuckle to strut, but now the bolts won't come out, the rust has welded them in place.
    • Moved to removing strut and A arm. Both have bolts that have snapped off.
    • Now trying to figure out how to replace all this.
     
  17. Isaac Zachary

    Isaac Zachary Senior Member

    Joined:
    Jan 20, 2018
    2,139
    1,008
    1
    Location:
    USA
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Helping a friend fix his car he got for "a good deal". Like anything under $15,000 anymore:
    • Trying to remove the wheel bearing one of the bolts backed out then got stuck.
    • Moved to removing steering knuckle. Got the nuts off the two main bolts from steering knuckle to strut, but now the bolts won't come out, the rust has welded them in place.
    • Moved to removing strut and A arm. Both have bolts that have snapped off.
    • Now trying to figure out how to replace all this.
     
  18. hill

    hill High Fiber Member

    Joined:
    Jun 23, 2005
    20,305
    8,419
    54
    Location:
    Montana & Nashville, TN
    Vehicle:
    2018 Chevy Volt
    Model:
    Premium
    That story never gets old

    Which evokes another event. The PC servers
     
  19. ETC(SS)

    ETC(SS) The OTHER One Percenter.....

    Joined:
    Oct 28, 2010
    7,902
    6,693
    0
    Location:
    Redneck Riviera (Gulf South)
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    ^I'm wondering WHERE there are 4 cars in America under $15000...
     
  20. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    25,099
    16,365
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    I don't know, but somebody there seems to be welding their strut bolts as some kind of prank.