1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Oil drain plug gasket sealed to oil pan

Discussion in 'Prius v Care, Maintenance and Troubleshooting' started by Matt Werser, Sep 10, 2024.

  1. Matt Werser

    Matt Werser New Member

    Joined:
    Sep 10, 2024
    3
    0
    0
    Location:
    Canada
    Vehicle:
    2012 Prius v wagon
    Model:
    N/A
    Does anyone have a picture of the oil pan drain hole without the gasket on a Prius v or third gen prius. I think a rubber gasket I got from the toyota dealership (not the blue one that's more commong) and put on last oil change is totally sealed to the oil pan and I've mangled it a bit trying to get it off. Just want confirmation I'm not mangling the oil pan, just the gasket. I've attached a picture for this too.

    Thanks!
    IMG_5246.jpeg
     
    #1 Matt Werser, Sep 10, 2024
  2. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,666
    39,220
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    I’ll jar them loose putting a slim, flat-bladed screw driver at the junction of washer and oil pan, give it a tap with a hammer.

    and yeah looks to be the washer; shouldn’t take more than a light tap.
     
    #2 Mendel Leisk, Sep 11, 2024
  3. Matt Werser

    Matt Werser New Member

    Joined:
    Sep 10, 2024
    3
    0
    0
    Location:
    Canada
    Vehicle:
    2012 Prius v wagon
    Model:
    N/A
    Thanks for the response. I've tried that, unfortunately since there is no metal component in the washer (fully rubber gasket?) it wont budge, just flake off as you see in the picture. I'm going to try heating the rubber with a heat gun and scraping it off!
     
    #3 Matt Werser, Sep 11, 2024
  4. Matt Werser

    Matt Werser New Member

    Joined:
    Sep 10, 2024
    3
    0
    0
    Location:
    Canada
    Vehicle:
    2012 Prius v wagon
    Model:
    N/A
    The heat gun did the trick. Thanks!
     
    #4 Matt Werser, Sep 11, 2024
  5. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,902
    16,209
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    Happens to me pretty much every oil change. I generally just poke the tip of a small screwdriver right up through the hole at a shallow angle so it's between the oil pan threads and the gasket on the opposite side, then push gently by hand on the screwdriver handle to pop the gasket off. Gently is the watchword, no need to go ballistic and nick the threads.
     
    #5 ChapmanF, Sep 11, 2024
    Air_Boss likes this.
(You must log in or sign up to post here.)