1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Engine randomly starting after EGR replace

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Pablo1914, Aug 23, 2024.

  1. Pablo1914

    Pablo1914 Junior Member

    Joined:
    May 27, 2015
    35
    2
    0
    Location:
    Atlanta, Ga
    Vehicle:
    2005 Prius
    Model:
    N/A
    Hi guys,

    I have a 2010 toyota Prius. 220K miles. Original hybrid battery.

    I was having the famous morning rattling in the engine but coolant level didn't go down. I opted for cleaning EGR valve. After cleaning better but not perfect. I then replaced EGR valve.

    Now car started and drove normal for about 10 min then gas engine wouldn't start. "check hybrid system" popped up. I feel it's because gas engine not cranking so hybrid running low on juice. I parked at gas station and was able to start engine. I drove and after engine went off it didn't want to start again. Turned car off and back on and engine came back on. Once the gas engine comes off and the the battery pushes the car, when the car wants to crank the gas engine won't crank and engine won't come on. I get all sort of lights on dash. I turned car off and back on about 3 times and was able to keep going (I was trying to make it to my house). Finally all lights came on and hybrid battery seems to be depleted to a degree so car is not starting now either in electric or cranking de gas engine. It's just reads "check hybrid system".
    If it would be a normal circumstance, I would think it's the old hybrid battery, but since it happened right after replacing the EGR, I have my doubts.

    This are the facts. Any input?
     
    #1 Pablo1914, Aug 23, 2024
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,156
    50,059
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    could be something in your cleaning process, maybe a missed or loose connector. but your best bet is a prius aware scanner to read the trouble codes, and post them here.
     
    #2 bisco, Aug 23, 2024
  3. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    6,424
    3,413
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    You need to check ALL the connections. Maybe a vacuum hose came off?
    I forgot to put the pcv hose on the intake today. Had the same issues.
    After pushing it on and installing the clamp, all is back to normal.

     
    #3 ASRDogman, Aug 23, 2024
  4. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,686
    39,234
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Long neglected EGR cleaning, head gasket failed (that “famous morning rattling”), you figured cleaning the EGR valve (just the valve?) will “heal” the head gasket?
     
    #4 Mendel Leisk, Aug 24, 2024
  5. Higgins909

    Higgins909 Member

    Joined:
    Apr 15, 2018
    268
    59
    2
    Location:
    Texas
    Vehicle:
    2010 Prius
    Model:
    III
    There was a vacuum hose right next to the brake module iirc that I either left off or slipped off. I don't think the car started at all. Can't remember what code it gave me, but I thought it was a singular code.

    Leaky fuel injectors can give you the cold start shake as well. Or if it was sitting 2 weeks or something.
     
    #5 Higgins909, Aug 24, 2024
  6. MAX2

    MAX2 Member

    Joined:
    Aug 12, 2024
    371
    88
    10
    Location:
    Third Rock from the Sun
    Vehicle:
    2007 Prius
    Model:
    N/A
    Does the "ready" light come on on the dashboard?
     
    #6 MAX2, Aug 26, 2024
(You must log in or sign up to post here.)