2024 Prius Limited AWD Camber Kit

Discussion in 'Gen 5 Prius Accessories and Modifications' started by Justin Prius AWD, Jun 29, 2024.

  1. Justin Prius AWD

    Justin Prius AWD Junior Member

    Joined:
    Dec 29, 2023
    37
    11
    0
    Location:
    California
    Vehicle:
    2024 Prius
    Model:
    Limited AWD-e
    I have a 2024 Prius lowered on RS-R springs. Went in yesterday for an alignment and learned that the rear is slightly out of factory tolerance and the front is right on the edge. This is with all possible adjustments. Depending on tire wear in the rear, I might need a camber kit. Any suggestions?
     
    #1 Justin Prius AWD, Jun 29, 2024
  2. PhoS

    PhoS Active Member

    Joined:
    Mar 13, 2023
    227
    187
    0
    Location:
    Northwest
    Vehicle:
    2023 Prius
    Model:
    Limited AWD-e
    Did you get a print out? I measured mine after the RSR springs and it was within the range. I wouldn't really worry about a tiny bit of negative camber. It's not going to drastically wear the tire. Otherwise, you would need an adjustable rear upper arm to increase camber on the back of which there are a few already available. The front can use a simple eccentric camber bolt kit. Not sure which size but I'm guessing 10mm or 12mm based on the size of the strut bolts.
     
    #2 PhoS, Jun 30, 2024
  3. zeng

    zeng Junior Member

    Joined:
    Aug 28, 2021
    45
    10
    0
    Location:
    Kuala Lumpur
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Front eccentric camber bolt size is 17 mm sir.
     
    #3 zeng, Jul 1, 2024
  4. PhoS

    PhoS Active Member

    Joined:
    Mar 13, 2023
    227
    187
    0
    Location:
    Northwest
    Vehicle:
    2023 Prius
    Model:
    Limited AWD-e
    Ah nice, I'm remembering now how enormous those bolts are compared to some other cars I have worked on recently. Have you installed them yourself? If so, how much camber were you able to gain?
     
    #4 PhoS, Jul 1, 2024
(You must log in or sign up to post here.)