Is there a thread for Gen 4 Wheels?

Do you still have the springs? Its been a while but worth a shot!

 

Hello everyone! I was wondering if 18inch wheels with an offset of 35, a width of 8J and 225/40 tires will rub inside the wheel arches when the car is fully loaded. I plan to keep the original springs. Thanks!

 

Try this: Toyota Prius - Specs of rims, tires, PCD, offset for each year and generation | Wheel-Size.com
I couldn't find an 18" OEM in a gen3 so not sure if it's going to rub w/o suspension mods.

 

Only way to know for sure is to weigh down the car to what you personally consider fully weighed and take measurements. I got 9 pages of posts by putting wheel fitment into the search box at the top of the homepage

https://priuschat.com/search/595144123/?q=wheel+fitment&o=relevance

 

Are the springs still available? I’d like to purchase it. I’m in inland empire

 

That's exactly why I was asking in this specific thread about wheels on Gen4 Prius

 

"Just sayin" that is a fairly detailed set of conditions and the tolerances are going to be close without extra weight. Is there a standardized weight limit for the Prius? 1000 lbs / 450 kg ? Would the extra weight be passengers, all in the cargo area, or some other configuration or weight distribution?
I hope you get lucky and someone else has already done what you're asking about and it has worked for their Gen 4.

 

No it will not rub. I ran 18x8 +35 with a 225/45 tires and did not rub

 

Hi everyone ! I finally found what I was looking for

A set of 18x8j ET35 wheels (RIAL "Lugano", very similar to Volkswagen "Interlagos" rims). They are second hand but in good condition, and are mounted with 235/40R18 winter tires that will soon be replaced with summer tires with proper dimensions (though I'm happy to announce that 235/40 tires don't rub).

 

If OP is still interested, I'm about to replace the stock OEM + Hubcap combination on my recently acquired 2018 Four with 2018 BRZ wheels. They have the same lug spacing and default tire size as the touring package and I'll just use a bore spacer. Pics to follow tomorrow!

 

Here you go, BRZ/Toyota 86 wheels. I forgot that you have to use an 8mm spacer to get the wheels to clear the callipers. you also need to change lug nuts.