Teyes CC3 2k Head unit (rear camera not working)

Connect Yellow (CCD AVIN) female plug into Yellow (CAM IN) plug, which ultimately is plugged into the F Port.
Good Luck.

 

Hey, could you please post a pic of what the new 2K screen looks like installed in your 2018?

 

Thank you. So it is as I had suspected. The facia kit is no longer glossy black, but looks rather matte. That's a shame, but not a dealbreaker for me.

 

Oh, really? Hmm, now THAT might be a dealbreaker for me.

 

I found a solution......it's a different Fascia -

http://bit.ly/3ImWmMe

Ends up looking like this -

 

Oh, it will definitely fit the 2K screen......found another pic -

 

Hey, I have a question about your CC32K. Seeing as how in standby mode, the CC32K is always drawing 'some' energy from the 12-volt battery, have you ever had an instance where it drained the battery to the point where you had to jump start your car after it's been off for more than 12 hours, but less than 24 hours?

 

Thanks for that. I have one more question for you. I will be doing my install in a couple weeks, and haven't found the info I need from anywhere else. What are the CANbus settings to get the Steering Wheel controls working? Which selections did you choose to get it all working? I would REALLY appreciate the information.

*also, when you get your new Fascia installed, I would love to see a pic. I've already received mine. Though it's not installed yet, I see now that the new Fascia is definitely superior to the one that T'Eyes gives us with the sale.

 

Yeah, as for retaining the microphone, I was going to follow this guy's approach....

I found the pinout. I was simply going to use T-Taps to 3 (ACC/Power) & 8 (Ground) , as well as 5 (Mic+) & 6 (Mic-). But, in that link you shared, there is another wire that needs to be grounded. Is my approach incorrect?

 

Hello I am trying to get an image from my T'eyes 3k also, how are you powering the camera? I wired as their diagram suggests yellow wire from composite extension cable to reverse light. Red wire from composite extension red wire camera 12volt. I get nothing. Any help would be appreciated.

 

Well, I tried it, and it didn't work. So, this weekend I am going to try the method that you linked. It's similar, so I have confidence it will work. Also, unfortunately the other Flat fascia DOES NOT work with my 2016. But, the fascia that T'Eyes sent, while it looks similar to yours, also does not cut off the bottom of the screen, and unlike yours is piano black just like our interiors.

*Hey, I have two extra fascias, so if you want to try one of them to see if they also do not block the bottom, just PM me your addy, and I'll send it to you for free.