I am having trouble unclipping this given clip. I am sure it is easy once you understand what needs to be done - I am not sure if it is stuck or if I am doing it incorrectly. My guess would be the little oragne depression between the gray/green tab should slide down and/or go down and then they can be unclipped. This is on the 2015 connects to the eletric onverter compressor
It didn't come appart easily once the green latch was removed however there is enough room once that is out you can stick a screw driver up in the other end it will then lift the tab and allow it to unlock the latch. That wasn't possible prior due to a piece of plastic holding it down with the green tab... I just wanted to follow up as I am sure someone else will have the same question possibly in the future. Thanks again!
