1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Rear door trim just went wild

Discussion in 'Gen 5 Prius Main Forum' started by N79PT, Mar 11, 2024.

  1. N79PT

    N79PT Junior Member

    Joined:
    Dec 8, 2023
    37
    16
    0
    Location:
    Sonoma County
    Vehicle:
    2024 Prius Prime
    Model:
    SE
    About 2 weeks after purchase I noticed the lifting of the black rear door trim. No physical damage evident. Looks like something only possible with a heat gun and then bending it. Will talk dealer on first service.
    Very strange. Anyone else have this happen?
    IMG_20240103_152943002_HDR.jpg IMG_20240103_144459310_HDR.jpg
     
    #1 N79PT, Mar 11, 2024
  2. PriusCamper

    PriusCamper Senior Member

    Joined:
    Mar 3, 2012
    11,330
    4,614
    0
    Location:
    Pacific Northwest, USA
    Vehicle:
    2007 Prius
    Model:
    Two
    Lol... Yeah... They gotta fix that for free and I bet it takes them a while to find a replacement part... Toyota used to be so much better than this kind of embarrassing!
     
    #2 PriusCamper, Mar 11, 2024
  3. HacksawMark

    HacksawMark Active Member

    Joined:
    Jun 29, 2023
    449
    312
    0
    Location:
    Oregon
    Vehicle:
    2023 Prius Prime
    Model:
    XSE
    I does look like it was subjected to heat for it to warp like that.
     
    #3 HacksawMark, Mar 11, 2024
  4. Peter3232

    Peter3232 Member

    Joined:
    Jan 18, 2024
    103
    44
    0
    Location:
    NY
    Vehicle:
    2024 Prius Prime
    Model:
    SE
    That is just unusual…

    Hopefully your local dealer service department repairs that under warranty and are able to order the part without much wait.

    Best of luck.
     
    #4 Peter3232, Mar 12, 2024
  5. Kenny94945

    Kenny94945 Active Member

    Joined:
    Mar 24, 2016
    812
    405
    0
    Location:
    Sausalito
    Vehicle:
    2016 Prius v wagon
    Model:
    Four
    I echo Peter 3232.

    FWIW It could be the seal is not being retained.
    Some low heat, with soap and pressure, to "click" it back in, if you DIY?

    At a dealer I would not be surprised if they remove the entire window and install a new seal and surround parts; plus I do not know if the interior needs to be removed to do so. Might be a somewhat "big" job so I would leave to warranty :)

    Yes, best of luck.
     
    #5 Kenny94945, Mar 12, 2024
  6. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,671
    39,221
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Would be fun to get it on record with the dealership, but don't push them, yet. See how extreme it can get. Park on the other side of the street for a while, get some symmetry going?
     
    #6 Mendel Leisk, Mar 12, 2024
  7. N79PT

    N79PT Junior Member

    Joined:
    Dec 8, 2023
    37
    16
    0
    Location:
    Sonoma County
    Vehicle:
    2024 Prius Prime
    Model:
    SE
    I too wish for the logic that possibly the heat of day made the bend happen. But between purchase on 17 DEC and first notice of bend, 3JAN, the weather here was cool and mostly overcast (nights not below 35*F, days not above 59*F). And parked car doesn’t get direct sun. Also I kept hoping it would get worse or the other side would go wild…no such luck.
    Kenny: the part is pretty much flat to the car body surface (in plane) as the normal condition. And there indicates a clear “bend”.
    It would make some sense to me if it were a formed plastic part (from sheet stock) that was not heated high enough and thus inducing residual stresses that over time caused the bend. But alas, probably injection molded. I’d probably guess maybe polyethylene or polypropylene; probably not vinyl.
    Oh life’s joy of mysteries. Not much else to live for.
     
    #7 N79PT, Mar 12, 2024
(You must log in or sign up to post here.)