1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2011 JBL E7022 Testing

Discussion in 'Gen 3 Prius Audio and Electronics' started by electricalcheeseburger, Jan 30, 2023.

  1. electricalcheeseburger

    electricalcheeseburger Junior Member

    Joined:
    Jan 30, 2023
    12
    2
    0
    Location:
    US
    Vehicle:
    2010 Prius
    Model:
    LE
    Hello

    I have a JBL E7022 navigation unit from a 2011 Prius, how do I go about bench testing it ? There are like 9 plugs on the back . I don't know which specific one provides power to turn the unit on.
    Thanks to PC forums, I've been able to bench test gen 1 MFDs with great success

    Thanks everyone
    Ec

    Pixel 6 Pro ?
     
    #1 electricalcheeseburger, Jan 30, 2023
  2. electricalcheeseburger

    electricalcheeseburger Junior Member

    Joined:
    Jan 30, 2023
    12
    2
    0
    Location:
    US
    Vehicle:
    2010 Prius
    Model:
    LE
    Sad boi
     
    #2 electricalcheeseburger, Feb 2, 2023
  3. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,902
    16,209
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    #3 ChapmanF, Feb 3, 2023
  4. electricalcheeseburger

    electricalcheeseburger Junior Member

    Joined:
    Jan 30, 2023
    12
    2
    0
    Location:
    US
    Vehicle:
    2010 Prius
    Model:
    LE
    Those are hastily typed indeed I cannot understand them.
     
    #4 electricalcheeseburger, Aug 28, 2023
  5. electricalcheeseburger

    electricalcheeseburger Junior Member

    Joined:
    Jan 30, 2023
    12
    2
    0
    Location:
    US
    Vehicle:
    2010 Prius
    Model:
    LE
    Found this pic on eBay of an E7022 that was powered on
    Conspicuously doesn't have the L41 connector present but there are wires stripped/twisted together for the L40 connector. Perhaps a clue ?
    Frustrating that no one has the info on how to just power it up in plain English
     

    Attached Files:

    #5 electricalcheeseburger, Oct 3, 2023
  6. electricalcheeseburger

    electricalcheeseburger Junior Member

    Joined:
    Jan 30, 2023
    12
    2
    0
    Location:
    US
    Vehicle:
    2010 Prius
    Model:
    LE
    Sat down and finally figured it out, on Plug L40:
    Ground pin 20
    Power to pin 1&11

    Simple as

    Pixel 6 Pro ?
     
    #6 electricalcheeseburger, Dec 21, 2023
    bisco likes this.
  7. BentBadger74

    BentBadger74 New Member

    Joined:
    Feb 13, 2024
    2
    0
    0
    Location:
    St. Louis
    Vehicle:
    2010 Prius
    Model:
    N/A
    So I was in the same boat. Tested the unit it's shot. I got another that works on the bench but when inside it does the same as the old one just tilts and nothing else. No screen, no nothing. Does the unit have to be programmed when swapping? I know some vehicles you can't swap modules without programming is this the same case here?
     
    #7 BentBadger74, Feb 13, 2024
  8. BentBadger74

    BentBadger74 New Member

    Joined:
    Feb 13, 2024
    2
    0
    0
    Location:
    St. Louis
    Vehicle:
    2010 Prius
    Model:
    N/A
    Solved the issue.
     
    #8 BentBadger74, Feb 14, 2024
(You must log in or sign up to post here.)