1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Optima Yellowtop Breather Tube

Discussion in 'Gen 3 Prius Audio and Electronics' started by tallest420, Jan 15, 2024.

  1. tallest420

    tallest420 New Member

    Joined:
    Jan 15, 2024
    3
    1
    0
    Location:
    Chicagoland
    Vehicle:
    2012 Prius
    Model:
    Three
    Hello- I have a Gen.3 Prius and I just installed a new Optima Yellow Top AGM Battery (BCI Group Size 24R 450 CCA 46B24R). The Prius breather hose that fit the previous battery doesn't fit properly. It's too small, thus doesn't fit snugly and falls out. I was wondering if there's an aftermarket part that'll make the too-small hose that doesn't stay in the battery to stay in there. I understand the breather hose is "just for the lawyers," etc. but I'd really like that little thing to stay in the battery properly. (without duct tape) Any help?
     
    #1 tallest420, Jan 15, 2024
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,129
    50,045
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    you have the fitting at the end of the hose?
     
    #2 bisco, Jan 15, 2024
  3. tallest420

    tallest420 New Member

    Joined:
    Jan 15, 2024
    3
    1
    0
    Location:
    Chicagoland
    Vehicle:
    2012 Prius
    Model:
    Three
    Yep. It’s on there. Just doesn’t fit in there nice and snug.
     
    #3 tallest420, Jan 15, 2024
  4. AzWxGuy

    AzWxGuy Weather Guy

    Joined:
    May 22, 2011
    1,003
    498
    0
    Location:
    Tucson, AZ
    Vehicle:
    2021 Prius
    Model:
    Limited
    I replaced a 12V in my 2011 with a Yellow Top. The fitting in question is, if I remember correctly, a 90 degree elbow with the end that inserts into the battery vent port keyed to insert and then turn to a locked position. What I don't remember is if that fitting was the OEM Toyota one or something that came along with the new battery. I am certain though that the elbow is inserted into the keyed battery port and then rotated probably clockwise a quarter turn or less to a locked position.
     
    #4 AzWxGuy, Jan 16, 2024
  5. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,129
    50,045
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    It’s interesting, because I don’t recall anyone ever mentioning it as a problem , and there have been a lot of yellow tops installed over the years.
    Maybe a call to them?
     
    #5 bisco, Jan 16, 2024
  6. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,666
    39,220
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    My yellow top vent works ok with the stock vent tube connection. It was purchased in September of 2015 though; could be something has changed in the interim.
     
    #6 Mendel Leisk, Jan 16, 2024
    bisco likes this.
  7. tallest420

    tallest420 New Member

    Joined:
    Jan 15, 2024
    3
    1
    0
    Location:
    Chicagoland
    Vehicle:
    2012 Prius
    Model:
    Three
    The elbow is connected on the tube still & it fit the Bosch battery that was removed nice and snugly. It just doesn’t fit the same in the Optima. It’s a loose fit, like the elbow needs to be bigger.
     
    #7 tallest420, Jan 16, 2024
    bisco likes this.
(You must log in or sign up to post here.)