A mechanic replaced my brake actuator assembly and cleared all codes. Drove fine for a week then codes all popped back up again. Took it in again and he cleared the codes again. Only lasted a day this time and all codes popped up again. Brake/ABS/ Skid control etc. Not sure where to go from here to fix this issue. Any advice would be appreciated.
Mechanic started it up this morning and no lights on working perfectly. Don’t understand what’s going on with it.
Ask your mechanic for the code info if you get warning lights again. They should also be listed in his invoice for the original work. I’m not a mechanic and I can clear codes with my scan tool. That doesn’t mean the issue has been corrected.
Ask your mechanic for the code info if you get warning lights again. They should also be listed in his invoice for the original work. I’m not a mechanic and I can clear codes with my scan tool. That doesn’t mean the issue has been corrected.
Without needing any mechanic or any scan tool, when those lights come on you can get the codes responsible, by doing this: Blink (a/k/a Flash) Codes – How to. | PriusChat Then you can post them here, and we'll be able to say useful things.
