1. Attachments are working again! Check out this thread for more details and to report any other bugs.

EGR cleaning

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by paphillyman, Oct 2, 2023.

  1. paphillyman

    paphillyman Member

    Joined:
    Mar 9, 2013
    84
    88
    0
    Location:
    philly suburbs
    Vehicle:
    2012 Prius
    Model:
    III
    before ya take all the hoses off the cooler , you can drain some coolant ( maybe about half of it?) out so ya don't have to deal with ant spills , my question is when you put it back in , do you have to but your car into maintenance mode to get any air bubbles out , or just fill it back up and you're good.
     
  2. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    6,421
    3,410
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    If you fill it VERY SLOWLY, and a little at a time, and stop several time to allow it to
    settle and put the air out, you should be fine.

     
  3. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    6,421
    3,410
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
  4. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,671
    39,221
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    See first link in my signature, second to last paragraph. Second link has more tips as well. On a phone turn it landscape to see signature.
     
  5. paphillyman

    paphillyman Member

    Joined:
    Mar 9, 2013
    84
    88
    0
    Location:
    philly suburbs
    Vehicle:
    2012 Prius
    Model:
    III
    ty , like the part on leaving the upper most hose off til ya see coolant flowing out and pour it very slowly in a little at a time . sounds good tyvm
     
    Merv Himself and Mendel Leisk like this.