1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Gas Gauge Showing Empty after Combo Meter replacement

Discussion in 'Gen 2 Prius Technical Discussion' started by Bart A Hammontree, Sep 4, 2023.

  1. Bart A Hammontree

    Bart A Hammontree Junior Member

    Joined:
    Mar 4, 2020
    18
    5
    0
    Location:
    Knoxville, Tennessee
    Vehicle:
    2005 Prius
    Model:
    N/A
    Hello

    I just replaced the combo meter on my 2005 Prius due to intermittent combo meter issues (loss of display, car not turning off, etc). Everything works now with exception of the fuel gauge. It shows empty all the time (one bar flashing) regardless of how much gas is in the car. I removed the meter to make sure all the wires were plugged in and everything was connected. I reinstalled and am still getting the same issues with the fuel gauge. I have tried the inclination meter calibration and can't get it to go into the calibration mode. Could this be a bad replacement combo meter (purchased on ebay used) or is there any other things I can try?

    Thanks
     
    #1 Bart A Hammontree, Sep 4, 2023
  2. Bart A Hammontree

    Bart A Hammontree Junior Member

    Joined:
    Mar 4, 2020
    18
    5
    0
    Location:
    Knoxville, Tennessee
    Vehicle:
    2005 Prius
    Model:
    N/A
    I just tried the inclination meter calibration again, and it worked this time. Gauge is showing full as it should. I think I was hitting the button too many times or something.
     
    #2 Bart A Hammontree, Sep 4, 2023
    JohnPrius3005, bisco and Tombukt2 like this.
  3. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,129
    50,045
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    well done!
     
    #3 bisco, Sep 4, 2023
  4. Pat Faram

    Pat Faram New Member

    Joined:
    Mar 12, 2024
    1
    0
    0
    Location:
    Buffalo, KS
    Vehicle:
    2006 Prius
    Model:
    Five
    Well darn, I have the same problem after I replaced the capacitor. I have tried the inclination calibration a dozen times and it still shows empty. New 12v battery, fully charged. I will try it a few more times, unless someone has another fix. Thanks!
     
    #4 Pat Faram, Mar 15, 2024
  5. dolj

    dolj Senior Member

    Joined:
    May 14, 2012
    7,854
    3,965
    0
    Location:
    Wellington, New Zealand
    Vehicle:
    2007 Prius
    Model:
    N/A
    Every time you disconnct power to the CM, it needs to recalibrate the fuel level when power is restored. This can take anywhere from 5 minutes to 5 days.
     
    #5 dolj, Mar 15, 2024
(You must log in or sign up to post here.)