1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2008 Prius- put into Gear- POP- now only GRINDING noise in D and R.

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by kenneth winter, May 28, 2023.

  1. kenneth winter

    kenneth winter Junior Member

    Joined:
    Mar 16, 2021
    34
    9
    0
    Location:
    tn
    Vehicle:
    2008 Prius
    Model:
    III
    2008 Prius 223k

    I put the car in gear, held the brake to charge the hybrid battery before removal.

    POP. The car lurched and lost drive.

    * Now there is a nasty metal, grinding noise from the transmission.

    * When put into N, the grinding sound was less but still there.

    * When put into D/R. It went into d/ R on the dash... but no movement and Grinding sound.

    * I turned it off.

    * I scanned for DCT error codes.. NONE.

    *Restarts fine.
    * Shifts into each drive position fine.
    *When in R or D. stepping on the throttle pedal, the engine starts fine and the grinding noise amplifies with RPM.

    * I also noted that when put into Park. The car rolls freely forward or back.

    It feels like the engine/hybrid drive is disconnected from the axels??

    What do I test next.?


    The grinding noise is a similar noise to when a chain in a 4x4 transfer case breaks..
     
  2. spdracrm3

    spdracrm3 Member

    Joined:
    Jun 23, 2019
    47
    40
    0
    Location:
    estacada or
    Vehicle:
    2004 Prius
    Model:
    V
    See if one of the axles popped out of transmission or the cardan joint broke.

    SM-G960U ?
     
  3. kenneth winter

    kenneth winter Junior Member

    Joined:
    Mar 16, 2021
    34
    9
    0
    Location:
    tn
    Vehicle:
    2008 Prius
    Model:
    III
    How? jack up and turn Wheels?
     
  4. kenneth winter

    kenneth winter Junior Member

    Joined:
    Mar 16, 2021
    34
    9
    0
    Location:
    tn
    Vehicle:
    2008 Prius
    Model:
    III
    Jacked up each side.. turned the wheels. opposite wheel turned opposite direction.. ?
     
  5. ColoradoCrow

    ColoradoCrow Active Member

    Joined:
    Sep 2, 2019
    980
    398
    1
    Location:
    Leawood, KS
    Vehicle:
    2008 Prius
    Model:
    I
    That is a good thing. Have you checked the transmission fluid? Your electric parking brake is clearly not working. Sounds like the transmission is between gears. CPS still attached? Not disconnected?
     
  6. TMR-JWAP

    TMR-JWAP Senior Member

    Joined:
    Aug 12, 2016
    6,404
    6,062
    0
    Location:
    Columbia, SC
    Vehicle:
    2007 Prius
    Model:
    Touring
    Here's the Maintenance manual section for the transaxle. Good Luck.
     

    Attached Files:

    SFO likes this.
  7. dolj

    dolj Senior Member

    Joined:
    May 14, 2012
    7,854
    3,965
    0
    Location:
    Wellington, New Zealand
    Vehicle:
    2007 Prius
    Model:
    N/A
    Prius does not have a conventional auto transmission so no gears to get stuck in between.
     
  8. kenneth winter

    kenneth winter Junior Member

    Joined:
    Mar 16, 2021
    34
    9
    0
    Location:
    tn
    Vehicle:
    2008 Prius
    Model:
    III
    upload_2023-5-29_9-7-44.png

    My guess is that this chain broke???

    upload_2023-5-29_9-12-26.png
     
  9. kenneth winter

    kenneth winter Junior Member

    Joined:
    Mar 16, 2021
    34
    9
    0
    Location:
    tn
    Vehicle:
    2008 Prius
    Model:
    III
    1. All electronics are working.. gear selection, ICE starting
    2. Trans fluid level good
    3. Trans cooling level good.
    4. No dtc codes/
    5. Just no moving when in R or D.
    6. Grinding sound in all gears and N and Park.

    The Chain is in the top side of the case.
    Does anyone know IF you can see the chain from any fill hole or plate.?
    It can not be see from bottom fill hole..
     
  10. mr_guy_mann

    mr_guy_mann Senior Member

    Joined:
    Sep 3, 2020
    3,668
    1,715
    0
    Location:
    NJ-USA
    Vehicle:
    2006 Prius
    Model:
    Four
    I'm not sure that the chain is your problem. You say the car can be rolled if it's shifted to park. The parking pawl actuator looks to engage a gear on the countershaft driven gear, which meshes with the differential. Something between that and the wheels is broken.

    Really, the practical route is to confirm that the axle shafts are intact to the trans. If so then it's time for a used trans.

    Posted via the PriusChat mobile app.
     
  11. kenneth winter

    kenneth winter Junior Member

    Joined:
    Mar 16, 2021
    34
    9
    0
    Location:
    tn
    Vehicle:
    2008 Prius
    Model:
    III
    Good info... How do I test the axles?
    1. I jacked up the car. spun both wheels. Each causes the opposite wheel to spin the opposite direction. pin the other wheel. the other stops..
     
  12. kenneth winter

    kenneth winter Junior Member

    Joined:
    Mar 16, 2021
    34
    9
    0
    Location:
    tn
    Vehicle:
    2008 Prius
    Model:
    III
    New test. Wheels lifted. off ground.

    Shift in to D and R.. Wheels rotate in proper direction?
    Still No park?
     
  13. kenneth winter

    kenneth winter Junior Member

    Joined:
    Mar 16, 2021
    34
    9
    0
    Location:
    tn
    Vehicle:
    2008 Prius
    Model:
    III
    Mystery repair.
    1. Dropped trans fluid - replaced
    2. Dropped trans coolant - replaced
    3. Car on jack stands.. rolled wheel many direction.
    4. Shifted into all gears and rolled wheels.
    5. Put in park, rolled wheels.. Heard a CLICK. and the park brake set.
    6. Started car and now it will go in gear.
    7. Test drove- now it works??

    Happy I am .
    Trust it.. NO.
    What on earth happened?
     
    bisco likes this.