What is this roof tinted plastic moulding for?

Discussion in 'Gen 4 Prius Main Forum' started by Bristolbob, Mar 18, 2023.

Tags:
  1. Bristolbob

    Bristolbob New Member

    Joined:
    Mar 17, 2023
    12
    3
    0
    Location:
    UK
    Vehicle:
    2016 Prius
    Model:
    Four
    What is this tinted roof moulding called and does it serve any purpose? Am trying to locate the source of a bad rain leak so was wondering if it's ok to reseal around this piece. Thanks in advance.

    IMG-20230317-WA0008.jpg IMG-20230317-WA0009.jpg
     
    #1 Bristolbob, Mar 18, 2023
  2. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    25,076
    16,343
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    I suspect it's just covering where the sheet metal does something unsightly to support the hatch hinges. If the molding comes easily off, you should be able to see all the concealed mysteries (which will often include a lot of rotting leaves).
     
    #2 ChapmanF, Mar 18, 2023
    Bristolbob likes this.
  3. Elektroingenieur

    Elektroingenieur Senior Member

    Joined:
    Jan 8, 2017
    2,515
    3,271
    9
    Location:
    California
    Vehicle:
    2016 Prius
    Model:
    Three Touring
    #3 Elektroingenieur, Mar 18, 2023
    Bristolbob likes this.
  4. Bristolbob

    Bristolbob New Member

    Joined:
    Mar 17, 2023
    12
    3
    0
    Location:
    UK
    Vehicle:
    2016 Prius
    Model:
    Four
    Thanks for the suggestion. Once I figure out how to remove it I will do just that

    That is fantastic! Could not have wished for a better reference. Will figure out how to follow the instructions in reverse in order to remove and check under the moulding.
     
    #4 Bristolbob, Mar 18, 2023
    Last edited by a moderator: Mar 19, 2023
  5. Elektroingenieur

    Elektroingenieur Senior Member

    Joined:
    Jan 8, 2017
    2,515
    3,271
    9
    Location:
    California
    Vehicle:
    2016 Prius
    Model:
    Three Touring
    The Repair Manual (more info) has illustrated procedures for removal and installation, under Vehicle Exterior: Exterior Panels/Trim: Roof Garnish; there are some steps that aren’t obvious, such as applying protective tape to the side finish moulding sub-assemblies. To get access to the nuts, you’ll also need the procedures (each with about 70 steps) to remove and reinstall the roof headlining and related interior trim.
     
    #5 Elektroingenieur, Mar 19, 2023
    Bristolbob likes this.
  6. Bristolbob

    Bristolbob New Member

    Joined:
    Mar 17, 2023
    12
    3
    0
    Location:
    UK
    Vehicle:
    2016 Prius
    Model:
    Four
    Thanks again for the additional information. Sounds like it might take a while but it has to be done.
     
    #6 Bristolbob, Mar 19, 2023
    Elektroingenieur likes this.
(You must log in or sign up to post here.)