Help, I have two cable loose Manifold Absolute Pressure Sensor Connector in Prius two 2012.

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Wynona Janer, Dec 30, 2022.

  1. Wynona Janer

    Wynona Janer Junior Member

    Joined:
    Jun 25, 2021
    21
    4
    0
    Location:
    Washington DC, USA
    Vehicle:
    2012 Prius
    Model:
    Two
    I have two loose cables (yellow and blue) from the
    Manifold Absolute Pressure Sensor connector,
    only black color stays connected
    does anyone know the order or where can I get the information?


     
    #1 Wynona Janer, Dec 30, 2022
  2. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    25,692
    16,781
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    D3.png

    If you look in the online wiring diagram, as described in this wiki page:

    Toyota Service Information and Where To Find It | PriusChat

    you can find the part numbers for the repair terminals to be used for that connector (and for the crimp sleeves to be used with them), and see how the connector comes apart to release the old broken terminals so you can insert the new ones. This post gives an example of how that information's presented (though for a different connector, of course).
     
    #2 ChapmanF, Dec 30, 2022
  3. Wynona Janer

    Wynona Janer Junior Member

    Joined:
    Jun 25, 2021
    21
    4
    0
    Location:
    Washington DC, USA
    Vehicle:
    2012 Prius
    Model:
    Two
    ChapmanF thank you for the information, it was very helpful.
     
    #3 Wynona Janer, Dec 30, 2022
(You must log in or sign up to post here.)