1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Oil catch can

Discussion in 'Gen 2 Prius Accessories & Modifications' started by Babingus_Wobbington, Dec 22, 2022.

  1. Babingus_Wobbington

    Babingus_Wobbington New Member

    Joined:
    Nov 27, 2022
    5
    0
    0
    Location:
    Bingdingus
    Vehicle:
    2009 Prius
    Model:
    II
    Hi all,

    2009 Prius with 175xxx miles. Consuming a quart of oil per 1200 miles approximately. Going to install oil catch can to see if it helps/for fun. Can people please confirm my understanding or correct me if I have something wrong?

    - the pcv valve connects to intake manifold near the throttle body by a single hose
    - oil catch can should be installed in line between the pcv valve and the intake manifold - intake from pcv out to the manifold

    My plan is to connect 3/8 transmission line hosing material to pcv valve, then connect to oil catch can, then connect to the manifold from the can using the existing hose. Does this sound like a suitable procedure? If not I welcome advice. Thanks!
     
    #1 Babingus_Wobbington, Dec 22, 2022
  2. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,666
    39,220
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Not sure but think with gen 2 PCV routing (starts atop valve cover) there’s much less need for OCC?

    BTW: do be very careful if unscrewing the PCV valve. If you use an open jaw wrench, when you break it loose it’s very prone to punch a hole through the valve cover. Safer to pull off PCV hose first and use either a deep socket or closed-style box wrench.
     
    #2 Mendel Leisk, Dec 23, 2022
  3. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,902
    16,209
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    Or, as Mendel once drew in CAD:

    [​IMG]
     
    #3 ChapmanF, Dec 23, 2022
    Gen2_Accel, Montgomery, nancytheprius and 1 other person like this.
  4. mr_guy_mann

    mr_guy_mann Senior Member

    Joined:
    Sep 3, 2020
    3,668
    1,715
    0
    Location:
    NJ-USA
    Vehicle:
    2006 Prius
    Model:
    Four
    Sounds ok. It's the same setup I put on my 06. Doesn't do too much though. Maybe 6 oz of spooge in warmer months. Lots of condensed water in colder months. (have to drain it at 2.5k or it will be completely full of water).

    Still have oil pooling in the intake. And most of your oil consumption is likely stuck oil rings on the pistons anyway.

    Have fun.

    Posted via the PriusChat mobile app.
     
    #4 mr_guy_mann, Dec 23, 2022
    nancytheprius likes this.
  5. Babingus_Wobbington

    Babingus_Wobbington New Member

    Joined:
    Nov 27, 2022
    5
    0
    0
    Location:
    Bingdingus
    Vehicle:
    2009 Prius
    Model:
    II
    Thanks for the replies! I’ve already replaced PCV - will hold off on the OCC for now. Did my spark plugs and new o2 sensor yesterday - I bought this car on FB marketplace and there are all types on “interesting” things missing - EG one coil pack was missing a gasket and there was a spiders nest in there. Gonna post a thread with some questions about disconnected wires and other weird things I’ve found
     
    #5 Babingus_Wobbington, Dec 24, 2022
(You must log in or sign up to post here.)