Valve Cover Torque Sequence

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by iliakolesnikov, Oct 19, 2022.

Tags:
  1. iliakolesnikov

    iliakolesnikov New Member

    Joined:
    Oct 14, 2022
    2
    0
    0
    Location:
    Jacksonville
    Vehicle:
    2010 Prius
    Model:
    Three
    Anyone have the torque sequence for the valve cover? Searched the manual and I can't seem to find anything about it. Can't seem to find it for the life of me. Any help would be appreciated. Thanks.
     
    #1 iliakolesnikov, Oct 19, 2022
  2. StarCaller

    StarCaller Senior Member

    Joined:
    Feb 15, 2014
    1,266
    716
    0
    Location:
    Cedar Crest, NM, USA
    Vehicle:
    2014 Prius
    Model:
    Two
    #2 StarCaller, Oct 19, 2022
    Last edited: Oct 19, 2022
  3. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    25,665
    16,765
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    The manual just doesn't call it "valve cover". If you're doing a text search in a PDF copy, search for INSTALL CYLINDER HEAD COVER SUB-ASSEMBLY.

    According to an old 2010 PDF in circulation, there are 13 bolts and they all go to 10 N·m (102 kgf·cm, 7ft·lbf), in no specified order. Criss-crossing from the middle outward would be typical for such a thing when they don't give a more specific rule. But 7 ft·lbf is such a gentle torque anyway, this isn't one of those cases where tightening order is as critical as it is for, say, the cylinder head.
     
    #3 ChapmanF, Oct 19, 2022
    Mendel Leisk likes this.
(You must log in or sign up to post here.)