1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Rear wheel bearings?

Discussion in 'Gen 1 Prius Plug-in 2012-2015' started by Dbasra99, Sep 17, 2022.

  1. Dbasra99

    Dbasra99 Junior Member

    Joined:
    Oct 13, 2021
    29
    4
    0
    Location:
    Parkersburg WV
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    I am getting close to 300k miles on my 2012 plug in. I am noticing a hum from the back end. It is weird, if I am on the interstate going straight or slight right turn I hear the hum.....if I have even the slightest left turn the hum goes away.

    Does this sound like rear wheel bearings?

    Thanks
     
    #1 Dbasra99, Sep 17, 2022
  2. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,904
    16,213
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    Wouldn't surprise me. You could check if the hum goes exactly with wheel speed.

    If you drive at 30 and then at 40, and that makes the hum sound like the first two notes of "here comes the bride", and you drive at 30 and then at 45, and that makes it sound like the first and second twinkle in "twinkle, twinkle little star", then it's something linked to the wheel speed.
     
    #2 ChapmanF, Sep 17, 2022
  3. rjparker

    rjparker Tu Humilde Sirviente

    Joined:
    Jun 6, 2008
    8,489
    5,056
    7
    Location:
    Texas Hill Country
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    Yes, wheel bearings 95%. Been there done that. Typically they may be quiet for the first five minutes when the car is cold, quickly getting louder up to perhaps 50 mph. Faster than that road noise usually drowns them out. Any mechanic who has been around the block a few times will recognize the noise.

    If you remove the calipers with the wheel jacked up you can hear them, especially if you compare one side to the other. Don't buy cheap wheel bearing hub assemblies, they usually fail in a year. Timkens or OEM.

    These part numbers are for a 2012 Prius v with 16" wheels. Yours will be different.

    272DB3B3-AC18-48EB-B479-46CAE6310FB6.jpeg
     
    #3 rjparker, Sep 17, 2022
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,132
    50,047
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    How is your ev range at 300k?
     
    #4 bisco, Sep 18, 2022
  5. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,904
    16,213
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    With good bearings or rumbly ones?
     
    #5 ChapmanF, Sep 18, 2022
  6. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,132
    50,047
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    would be nice to see before and after
     
    #6 bisco, Sep 18, 2022
  7. Dbasra99

    Dbasra99 Junior Member

    Joined:
    Oct 13, 2021
    29
    4
    0
    Location:
    Parkersburg WV
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Thanks....I am searching for the OEM or Timken....trying to find a deal but pretty pricey.

    I will let you know if it was the problem in a few days.
     
    #7 Dbasra99, Sep 18, 2022
  8. Dbasra99

    Dbasra99 Junior Member

    Joined:
    Oct 13, 2021
    29
    4
    0
    Location:
    Parkersburg WV
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    I am around 12 miles on a charge. I will let you know if the new bearings make a difference.
     
    #8 Dbasra99, Sep 18, 2022
    bisco likes this.
  9. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,132
    50,047
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    that's amazing!
     
    #9 bisco, Sep 19, 2022
(You must log in or sign up to post here.)