I tried a pair of 4 ohm speakers (which shall remain nameless) and was very disappointed by the bass response and loss of power...so, I investigated and found that JBL makes a component set that is 2 ohms (JBL GTO607C)...let me say that I believe these are the way to go...the tweeters clear the shrillness of the old, and I finally have some low end (though there is still that bump in the upper bass) that I can live with...also Dynamatted the doors... Recommended...
Did you use the crossovers that came with the kit or just the speakers? It looks like a nice set. I presume you replaced the fronts only, or did you replace the backs too?
<div class='quotetop'>QUOTE(jbarnhart @ Nov 20 2006, 01:04 PM) [snapback]352153[/snapback]</div> Did not use the crossovers...since the front tweeter and woofer are already split at the amp...but I will use them when I do the back doors!...
