1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Steering Wheel Controls after new head unit

Discussion in 'Gen 3 Prius Audio and Electronics' started by zdaughtry1, Mar 1, 2022.

  1. zdaughtry1

    zdaughtry1 Junior Member

    Joined:
    Oct 24, 2018
    3
    0
    0
    Location:
    Tampa
    Vehicle:
    2011 Prius
    Model:
    II
    Ok guys I’m sorta at a loss here and need some help. I just installed an Atoto S8 Premium 10.1” into my 2013 gen3. When I first wired it up everything worked perfect. I ran SW1 and SW2 wires from the 28 pin to my steering wheel control wires and grounded the SWC wire. Since everything worked I unplugged it and went to make final adjustments to the fitment of the head unit itself and when I reinstalled now only my track up button works nothing else on the steering wheel works INCLUDING AC controls and disp/trip. Any ideas on what I can do to fix this? I didn’t think the right side steering controls were anywhere on the 28 pin connector but I could be wrong. I was thinking a fuse possibly but then how would my track up button be working if there’s a blown fuse? Any help is appreciated!
     

    Attached Files:

    #1 zdaughtry1, Mar 1, 2022
  2. NinjaWa

    NinjaWa New Member

    Joined:
    Mar 20, 2022
    4
    0
    0
    Location:
    sacramento
    Vehicle:
    2012 Prius
    Model:
    II
    sorry I'm not much of a help but do you happened to know how to run the backup cam to the atoto? we pretty much have the same HU and car, I'm at a loss on how to hook up the backup cam. I had an aftermarket backup cam and bought the adapter so I can hook it up to the factory HU.
     
    #2 NinjaWa, Mar 20, 2022
  3. NinjaWa

    NinjaWa New Member

    Joined:
    Mar 20, 2022
    4
    0
    0
    Location:
    sacramento
    Vehicle:
    2012 Prius
    Model:
    II
    btw, how did you mount your HU up? I bought a metra kit and can't seem to mount it in. seems like the holes on the metra don't match the HU.
     
    #3 NinjaWa, Mar 20, 2022
  4. Bob Brandon

    Bob Brandon Junior Member

    Joined:
    Jan 14, 2022
    8
    5
    0
    Location:
    Illinois
    Vehicle:
    2012 Prius
    Model:
    Three
    Might want to check out the iDatalink Maestro RR or RR2. I just got the RR2 for a Kenwood DMX957XR, and it works fine with my SWC. I had Best Buy install it, so I'm not sure how it all hooked up.
     
    #4 Bob Brandon, Apr 3, 2022
  5. tannerpace

    tannerpace Junior Member

    Joined:
    Apr 7, 2017
    42
    7
    0
    Location:
    charleston
    Vehicle:
    2014 Prius
    Model:
    Two
    sounds like you may have blown a fuse check under dash and hood area fuses, maybe faster to lookup what circute those control buttons are

    Posted via the PriusChat mobile app.
     
    #5 tannerpace, Jun 4, 2022
  6. Michael Naglee

    Michael Naglee Junior Member

    Joined:
    Aug 19, 2016
    12
    2
    3
    Location:
    West Virginia
    Vehicle:
    2007 Prius
    Model:
    N/A
    Did you ever have any luck on this? I installed exactly the same head unit last night. It took forever to find the right wiring diagram to identify the SWC wires. I hooked them up and the head unit will recognize that I pushed a button, but it can't seem to differentiate *which* button I pushed. The right side controls for climate don't work either. I imagine a resistor might be needed, but I can't find anyone referencing that except in Gen 2 prius forums.

    For those who might stumble on this in the future:
    I'm driving a 2013 Prius with nav unit, non-JBL. I found the SWC wires on the 28-pin connector in pins 21, 22, and 23. They're red, green, and pink. I've attached the wiring diagram I found.
     

    Attached Files:

    #6 Michael Naglee, Jul 17, 2022
(You must log in or sign up to post here.)