Plastic Push Fasteners

Jimi1976 · Dec 28, 2016

I use the Phillips head version of these push fasteners.....had a bag into tool box, purchased for use on my '05 Outback. They work just great on the 2010 Prius too!

ydpplqbd · Aug 15, 2019

Patrick Wong said: ↑

Those of you who DIY will have to remove various black plastic fasteners from time to time. As those fasteners age they will become brittle and will tend to break.

My personal standard of maintenance requires me to replace all such broken fasteners. If you feel the same way, then you might benefit from the following list of fasteners that are typically needed in the hood area. The prices shown are what I recently paid for web order at Champion Toyota, Houston.

90467-08136 MSRP $1.03, Net $0.78 You need two of these clips, found at either end of the two-piece black plastic cowl cover.

90467-10183 MSRP $1.01, Net $0.77 Five of these clips are used to secure the engine under cover.

90467-07164 MSRP $1.61, Net $1.22 Many of these clips are used to secure the plastic fender liners. You will have to remove the front of the LF fender liner when you drain the coolant heat recovery canister.

90467-06133-C0 MSRP $1.83, Net $1.39 Six of these clips are used to secure the black plastic radiator cover.

I suggest that you order a supply of each of these clips so that you can easily replace the old ones as they break. Have fun with your DIY maintenance and repair!
Click to expand...

Thanks so much for listing part numbers for these consumables.

PS I came up with a listing for the engine cover fasteners with Phillips slot on Amazon and ebay as follows: i.) Amazon listed as "OCR 6mm Push Hole Retainer Black Nylon Push Type Fastener Rivet Assortment Kit 100pcs(6mm-100pcs)"; and ii.) Ebay listed as "50Pcs Plastic Car Bumper Fender Hole Black Rivets Fasteners Clip 6mm For Toyota." Ebay listing is $1.89 for 50 fasteners from China (three to six weeks for shipping).

PPS It appears that P/N: 90467-10183 (described above) LACKS the Phillips slot.

Samuraidog · Apr 3, 2022

ChapmanF said: ↑

My favorite clip (for 7 mm holes) has ended up being the 90467-07117 ... I tend to put one in any time it will fit if I've taken out some other 7 mm variety. The push-center-button-in-and-pull-out action is just so much nicer to work with than the other styles.

-Chap
Click to expand...

I agree completely. I was baffled by the design at first, wondering how to remove it. Once I figured out how to use this type, it is a joy to use compared to the others.

Plastic Push Fasteners

Jimi1976 Active Member

ydpplqbd Active Member

Samuraidog Junior Member

About PriusChat

Quick Navigation

Like us on Facebook

Buy us a beer!

Useful Searches

Plastic Push Fasteners

Jimi1976 Active Member

ydpplqbd Active Member

Samuraidog Junior Member