File pump only work with 12v directly applied!

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Oldraiden36, Mar 12, 2022.

Tags:
  1. Oldraiden36

    Oldraiden36 New Member

    Joined:
    Mar 12, 2022
    1
    0
    0
    Location:
    WV
    Vehicle:
    2007 Prius
    Model:
    Base
    Ok guys, 2007 prius here. Kept getting the code for no start. I went through a series of checks and confirmed that there was no fuel at the fuel rail. I pulled the backseat and confirmed the fuel pump will work and the car will run if I directly apply 12v manually. I'm getting no power to the fuel pump. Research says to look at the integration module in the fuse box under the hood. I've located it and it appears to be a big cassette style block. My question is how do I test it and where I should be looking next??
     
    #1 Oldraiden36, Mar 12, 2022
  2. edthefox5

    edthefox5 Senior Member

    Joined:
    Jul 25, 2007
    10,096
    4,827
    0
    Location:
    Clearwater, Florida
    Vehicle:
    2007 Prius
    Model:
    Two
    You clearly have a blown fuse. It will be in the fuse box under the hood theirs a list of the fuses on the fuse box cover like any other car.
    But...there's a reason the fuse has blown.

    Go on Ebay and buy the factory Prius G2 electronic manual there very cheap like $25. It has all the schematics and lots of other good info.
    Its an absolute must if you own this car.


    Like this one:
    2006 Toyota Prius Electrical Wiring Diagram Service Manual EWD | eBay


    In the meantime use the use the search forum link up top and search:

    fuel pump.
     
    #2 edthefox5, Mar 17, 2022
  3. alftoy

    alftoy Senior Member

    Joined:
    Mar 16, 2009
    1,132
    513
    0
    Location:
    Saskatchewan, Canada
    Vehicle:
    2008 Prius
    Model:
    Base
    #3 alftoy, Mar 18, 2022
(You must log in or sign up to post here.)