You could also look for the Gen 4 as the width between the front strut towers should be identical. If @HAWAIIANBUILT is still around, he could point you to a place.
I emailed Cusco and they said it is difficult to put a strut tower bar on because of minimal amount of room
Anyone use this type of bar before? it doesnt go directly over the struts, not sure how well it works?
Those look more like body braces. You can go with MEG@TW stabiliser bars if you want bracing (It's underbody braces) instead of tower braces.
I have a 2019 non-Prime. I have the Cusco "strut" bar. I don't know why they call it that since it doesn't connect to the struts at all. If you want to get a real strut bar, I believe only Hardrace makes one. I have the Hardrace strut bar on my car as well (ignore the Cusco logos on the upper and lower bar. Had extra stickers and threw them on). Bottom brace is a Hardrace radiator brace Posted via the PriusChat mobile app.
no one sells one. the mounting points are physically there but there are some major differences between the headlight assembly locations. I purchased a set for the non prime model and had to cut and reweld the brackets as well as trim them to fit under the LED headlights.
Did you get the engine chassis brace or the strut tower brace? I want to get the strut tower brace. Just seeing how much I have to cut and weld.
