1. Attachments are working again! Check out this thread for more details and to report any other bugs.

3rd gen steering rack removal. HELP!

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Jonny Morrow, Nov 7, 2021.

  1. Jonny Morrow

    Jonny Morrow Junior Member

    Joined:
    Sep 20, 2012
    32
    9
    0
    Vehicle:
    2010 Prius
    Model:
    II
    Hey friends,

    Trying to get the steering rack out of my 2010. It’s all disconnected. Trying to slide it out through the transmission bottom mount. I have removed the 2 bolts and the 2 nuts for the bottom mount but when I jack up from the transmission slowly, the engine doesn’t release from the frame. It’s like something else is holding it. What am I missing? Could the mount be frozen to the frame? I tried banging around but it won’t release.

    I’m dead in the water until I can get this mount to jack upwards. Thanks guys!
     
    #1 Jonny Morrow, Nov 7, 2021
  2. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,682
    39,222
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Might have some info that'll help:
     

    Attached Files:

    #2 Mendel Leisk, Nov 7, 2021
  3. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    10,376
    1,792
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    Is the big long bolt that holds the exhaust down pipe to the engine loose . I believe the exhaust may be holding it down I don't know whether you need to undo the downpipe or whether it is attached with a bracket to the frame I can't remember on the gen 3

    SM-A715F ?
     
    #3 Tombukt2, Nov 7, 2021
  4. Jonny Morrow

    Jonny Morrow Junior Member

    Joined:
    Sep 20, 2012
    32
    9
    0
    Vehicle:
    2010 Prius
    Model:
    II
    Thanks for the replies guys.

    Mendel, anything in the service manual showing how exactly engine/trans are mounted to the frame?

    tombukt2, not seeing any large exhaust bolt. Any more specifics?

    Thanks!
     
    #4 Jonny Morrow, Nov 7, 2021
  5. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    10,376
    1,792
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    It holds the downpipe to a bracket that's on the engine I think when that's undone the engine can cock and move a little bit while still connected to the exhaust manifold I have to crawl up under my persona and take a look I'm about to pull the engine out of it

    SM-A715F ?
     
    #5 Tombukt2, Nov 7, 2021
  6. Jonny Morrow

    Jonny Morrow Junior Member

    Joined:
    Sep 20, 2012
    32
    9
    0
    Vehicle:
    2010 Prius
    Model:
    II
    Got it. 2 more bolts than I thought under hood passenger side. 3 total. Phew!

    Man steering rack replacement sucks. Thanks for the help guys!
     
    #6 Jonny Morrow, Nov 7, 2021
    Mendel Leisk likes this.
  7. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    10,376
    1,792
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    Ah front engine attachment points .. good ya got er

    SM-A715F ?
     
    #7 Tombukt2, Nov 7, 2021
(You must log in or sign up to post here.)