1. Attachments are working again! Check out this thread for more details and to report any other bugs.

My iPhone 12 Pro Max and the Qi Charging Plate hate each other

Discussion in 'Gen 4 Prius Audio and Electronics' started by robAlatte, Aug 25, 2021.

  1. robAlatte

    robAlatte Member

    Joined:
    May 28, 2021
    60
    40
    1
    Location:
    Palm Springs, CA
    Vehicle:
    2021 Prius Prime
    Model:
    Limited
    I've searched the threads on here and seems like most people have had good luck charging their iPhone X in the Prius Prime on the wireless QI charging plate. I have the iPhone 12 Pro Max and my phone says charging for about 5 seconds then the light turns orange and it stops charging. I have this clear and thin iPhone case:

    on Amazon;


    It didnt work with my Apple leather case either. Is there a trick as to where to place it? I've been placing it in the middle of the charging pad but haven't had any luck. If you have had good luck, please do let me know which case you have as I would love to have this feature work!

    Thanks so much :)
     
  2. Tideland Prius

    Tideland Prius Moderator of the North
    Staff Member

    Joined:
    Oct 2, 2004
    45,024
    16,242
    41
    Location:
    Canada
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    I'll let this one slide since the Gen 4 and Prime have the same charger and you might get more tips from Gen 4 owners as well as Prime owners.
     
  3. robAlatte

    robAlatte Member

    Joined:
    May 28, 2021
    60
    40
    1
    Location:
    Palm Springs, CA
    Vehicle:
    2021 Prius Prime
    Model:
    Limited
    Thank you, I couldn’t figure out how to delete the post or how to change the title since I put iPhone X in the title and I meant to put iPhone 12 pro max. I also realized this wasn’t the prime forum. My bad.
     
  4. Tideland Prius

    Tideland Prius Moderator of the North
    Staff Member

    Joined:
    Oct 2, 2004
    45,024
    16,242
    41
    Location:
    Canada
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Oh I can change that for you.
     
    robAlatte likes this.
  5. jerrymildred

    jerrymildred Senior Member

    Joined:
    Oct 28, 2016
    11,518
    14,128
    0
    Location:
    Tampa, FL
    Vehicle:
    2017 Prius
    Model:
    Two
    In either the Prime or the regular Gen 4, the Qi charger is junk. Too small, too weak. Too able to let the phone slide out under the driver's feet. And too hard to see Google Maps.

    I put a rubber liner over the charger so I can have a little bottle of hand sanitizer, an ink pen, and a couple other things I might want quick access to. The phone is on an adjustable mount on the dash where I can see it and keep it plugged in for map usage when needed.
     
  6. MIkeDr

    MIkeDr Active Member

    Joined:
    Sep 16, 2020
    252
    137
    0
    Location:
    Seattle, WA
    Vehicle:
    2020 Prius
    Model:
    XLE AWD-e
    FWIW, I’ve had no issues with my old school iPhone 8+ charging on our 2020 Prius or on a 2018 Prime that I rented a while ago. I have a thin case on the phone.

    When I place the phone on the pad, it starts charging immediately and the light on the pad goes from green to orange. When the phone is fully charged the pad light blinks orange.

    I’m wondering if the issue is related to the MagSafe magnets on your phone?
     
    krmcg likes this.
  7. Hidyho

    Hidyho Senior Member

    Joined:
    Jan 26, 2010
    2,698
    529
    0
    Location:
    Texas
    Vehicle:
    2018 Prius
    Model:
    Four
    Toyota Q charger is junk
     
  8. PaulDM

    PaulDM Active Member

    Joined:
    Sep 24, 2016
    616
    318
    2
    Location:
    UK
    Vehicle:
    2022 Prius
    Model:
    Excel
    No issues charging 8 x xs or 11
     
  9. ticedoff8

    ticedoff8 Junior Member

    Joined:
    Jul 8, 2010
    32
    9
    0
    Location:
    San Jose
    Vehicle:
    2010 Prius
    Model:
    III
    My wife and I each have the iPhone 8S and neither will change on my Qi pad in my 2017 "Touring".
    Neither will my daughter's X.
    Like the OP, they will all charge for about 5 seconds then the charge LED next to the Qi pad will start blinking and the phone indicates it's not charging anymore.
    I've tried all of them in or out of their cases and tried different areas of the pad.
    They all charge wirelessly on my desktop Qi charger stand that charges the phone, watch and Airpods at the same time without having to remove them from their cases.
    No one seems to have a fix.
     
  10. MIkeDr

    MIkeDr Active Member

    Joined:
    Sep 16, 2020
    252
    137
    0
    Location:
    Seattle, WA
    Vehicle:
    2020 Prius
    Model:
    XLE AWD-e
    I’ve noticed that my 8+ will only charge to about 95% on our 2020 XLE AWD-e. And if it’s hot outside, may not charge at all.

    dumb question, have you tried restarting your phone? If the car is still in warranty, I would take it to the dealer, and see if your phone charges on a car on the lot (preferably same model year). If so, this would suggest that the Qi charger in your car is broken.
     
  11. thomassster

    thomassster Member

    Joined:
    Nov 2, 2015
    239
    83
    0
    Location:
    Colorado, US
    Vehicle:
    2019 Prius
    Model:
    XLE AWD-e
    I would like to know also since I also own 12 pro max. But I’ve pretty much have given up on it. The 12 pro max is a big phone and can’t lay precisely where the peak spot of the coils need to meet. Only smaller phones can maybe do it.
     
  12. Tcman231

    Tcman231 Junior Member

    Joined:
    Mar 21, 2021
    6
    1
    0
    Location:
    Michigan
    Vehicle:
    2018 Prius
    Model:
    Four Touring
    yes! it would be nice if it would work also even though it is a slower charge I have the iPhone 12 pro max as well and it will only charge for a few minutes until you hot a substantial bump then it will charge until the next bump lol rather irritating
     
  13. RRxing

    RRxing Senior Member

    Joined:
    Jul 7, 2009
    2,522
    1,795
    0
    Location:
    NEPA
    Vehicle:
    Other Hybrid
    Model:
    Limited
    My XS Max with leather Apple case fits and charges just fine. Charging is slow, but doesn't drop out.
     
    robAlatte likes this.
  14. MIkeDr

    MIkeDr Active Member

    Joined:
    Sep 16, 2020
    252
    137
    0
    Location:
    Seattle, WA
    Vehicle:
    2020 Prius
    Model:
    XLE AWD-e
    RojaRosie likes this.
  15. PaulDM

    PaulDM Active Member

    Joined:
    Sep 24, 2016
    616
    318
    2
    Location:
    UK
    Vehicle:
    2022 Prius
    Model:
    Excel
    The reason the OP is having issues is the safety feature of the Qi charger fitted to the vehicle. There is a sensor which detects whether there is a reverse induction / temperature increase created by metal (or keys) left on the pad.
    The iPhone 12 and 13 series have magnets built into the phone to accommodate the MagSafe charging system and will always trip this sensor.
    Models predating the 12 will not trip this sensor and will charge correctly.
    I got round this by not using the pad anymore and mounting a MagSafe charger to the pad with double sided Velcro and put a black silicon cover on it (Amazon sell these) to cover the silver pad without preventing the MagSafe system working.
     
    #15 PaulDM, Dec 23, 2021
    Last edited: Dec 23, 2021
    RojaRosie, robAlatte and MIkeDr like this.
  16. Hidyho

    Hidyho Senior Member

    Joined:
    Jan 26, 2010
    2,698
    529
    0
    Location:
    Texas
    Vehicle:
    2018 Prius
    Model:
    Four
    Yes and no, correct on safety, but Q charger in Prius is a piece of junk, doesn’t charge any model year.
     
  17. MIkeDr

    MIkeDr Active Member

    Joined:
    Sep 16, 2020
    252
    137
    0
    Location:
    Seattle, WA
    Vehicle:
    2020 Prius
    Model:
    XLE AWD-e
    well, demonstrably wrong. My Prius, as well as a rental Prius, has no issues charging an 8 Plus and an IPhone SE.
     
    jerrymildred likes this.
  18. jerrymildred

    jerrymildred Senior Member

    Joined:
    Oct 28, 2016
    11,518
    14,128
    0
    Location:
    Tampa, FL
    Vehicle:
    2017 Prius
    Model:
    Two
    Was the 8 Plus in thick, protective case? My 8 Plus was in a thick Speck Case and would not lay flat in the charger. I haven't tried it yet with my 13 Pro, but suspect it would be better if I was OK with the phone laying on a slippery surface where it could easily slide off under my feet where the screen would be even harder to see.
     
  19. MIkeDr

    MIkeDr Active Member

    Joined:
    Sep 16, 2020
    252
    137
    0
    Location:
    Seattle, WA
    Vehicle:
    2020 Prius
    Model:
    XLE AWD-e
    I use a relatively thin case — this one.

    NEW Native Union CLIC Air Case for iPhone 8+ 7 PLUS Clear semi-transparent cover | eBay

    I’ve never had an issue with the phone sliding off.
     
    jerrymildred likes this.
  20. krmcg

    krmcg Lowered Blizzard Pearl Beauty

    Joined:
    May 15, 2008
    2,592
    2,390
    0
    Location:
    Whittier, CA
    Vehicle:
    2016 Prius
    Model:
    Four
    My iPhone 11 in a thin silicone case charges just fine. Not fast, but steady. The grip of the case keeps it in place pretty well.
     
    PaulDM likes this.