Need a replacement rim, preferrably from a salvage yard

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Mr. Humidity, Aug 23, 2021.

  1. Mr. Humidity

    Mr. Humidity Junior Member

    Joined:
    Oct 3, 2019
    12
    3
    0
    Location:
    USA
    Vehicle:
    2007 Prius
    Model:
    II


    My 2007 Prius needs a new rim (15 inch diameter, 185 mm width). I'd like to get a matching replacement as cheaply as possible, presumably from a salvage yard. I would welcome any advice on doing this.

    I called a salvage yard my mechanic recommended but never heard back from them.

    It seems like the way I'm most likely to get this rim is to go to a salvage yard, walk around and find it myself. Does that seem to be the case? I'm trying to replace a rim that's dinged and unbalanced. I would appreciate any suggestions on picking a salvaged rim that is not dinged itself (presumably choose a rim that's not close to the collision).

    Thanks
    signal-2021-08-23-094233.jpeg
     
    #1 Mr. Humidity, Aug 23, 2021
  2. TMR-JWAP

    TMR-JWAP Senior Member

    Joined:
    Aug 12, 2016
    6,404
    6,073
    0
    Location:
    Columbia, SC
    Vehicle:
    2007 Prius
    Model:
    Touring
    #2 TMR-JWAP, Aug 23, 2021
  3. Mr. Humidity

    Mr. Humidity Junior Member

    Joined:
    Oct 3, 2019
    12
    3
    0
    Location:
    USA
    Vehicle:
    2007 Prius
    Model:
    II
    Thank you! That's a great tip. I am near one of those facilities and four Gen 2's came up. So I will update once I've made the fix. Thanks again!
     
    #3 Mr. Humidity, Aug 23, 2021
  4. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    57,964
    39,991
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Spring for some aftermarket centre caps too?
     
    #4 Mendel Leisk, Aug 23, 2021
  5. Mr. Humidity

    Mr. Humidity Junior Member

    Joined:
    Oct 3, 2019
    12
    3
    0
    Location:
    USA
    Vehicle:
    2007 Prius
    Model:
    II
    Nah. When my first one fell off, I just took them all off. Same thing with the plastic watchamacallit that snaps onto the perimeter of the rim's spokes.
     
    #5 Mr. Humidity, Aug 23, 2021
    Mendel Leisk likes this.
  6. edthefox5

    edthefox5 Senior Member

    Joined:
    Jul 25, 2007
    10,096
    4,827
    0
    Location:
    Clearwater, Florida
    Vehicle:
    2007 Prius
    Model:
    Two
    Best way to check rim warp/bent rim is to put it on the rear and spin it. You will instantly see the smallest run out.
    These are small light weight wheels they bend easy if you curb 'em good. My wifes car 3 so far.

    And you need centercaps too if not the castlenut in there will rust really bad.Long time ago I filled that castlenut hole with grease and put the cap back on.
     
    #6 edthefox5, Aug 23, 2021
(You must log in or sign up to post here.)