1. Attachments are working again! Check out this thread for more details and to report any other bugs.

New to me 2010 T spirit in grey metallic

Discussion in 'Gen 3 Prius Main Forum' started by adrian-gregory, Jul 31, 2021.

  1. douglasjre

    douglasjre Senior Member

    Joined:
    Sep 13, 2008
    1,992
    676
    0
    Location:
    Null, NL
    Vehicle:
    2010 Prius
    Model:
    ----USA----
    For the bottom water pump bolt to be cross threaded that would mean it's been replaced before. First question is why was it already replaced once before and second question is why are you replacing it again?
     
  2. adrian-gregory

    Joined:
    Jul 27, 2021
    61
    40
    3
    Location:
    GAIA
    Vehicle:
    2010 Prius
    Model:
    Business Ed. Plus
    12v aux battery is showing as 11.6 volts so have ordered a replacement.
     
  3. adrian-gregory

    Joined:
    Jul 27, 2021
    61
    40
    3
    Location:
    GAIA
    Vehicle:
    2010 Prius
    Model:
    Business Ed. Plus
    New battery fitted.

    Ordered some gutter guard 5m x 16 cm. Will fit behind the grills to offer some stone protection for radiator(s).
     
    Mendel Leisk and ASRDogman like this.
  4. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    6,421
    3,410
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    Does everything work now?
     
  5. adrian-gregory

    Joined:
    Jul 27, 2021
    61
    40
    3
    Location:
    GAIA
    Vehicle:
    2010 Prius
    Model:
    Business Ed. Plus
    Yes it does.
     
    ASRDogman likes this.
  6. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,675
    39,222
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    I think about doing that; keep procrastinating. :unsure:
     
  7. Norryboy1a

    Norryboy1a Junior Member

    Joined:
    Feb 14, 2019
    80
    24
    0
    Location:
    Pennsylvania
    Vehicle:
    2010 Prius
    Model:
    III
    An amazing amount of sludge. Since I've been using 0-16, my mileage improved.
     
  8. adrian-gregory

    Joined:
    Jul 27, 2021
    61
    40
    3
    Location:
    GAIA
    Vehicle:
    2010 Prius
    Model:
    Business Ed. Plus
    Front bumper off, fitted a double layer of the gutter guard with some cable ties and then put it all back together. rust treated some of the surface rust that was exposed with the bumper off.
     

    Attached Files:

    Mendel Leisk likes this.
  9. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,675
    39,222
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Doable without bumper removal you think, or too awkward?
     
  10. adrian-gregory

    Joined:
    Jul 27, 2021
    61
    40
    3
    Location:
    GAIA
    Vehicle:
    2010 Prius
    Model:
    Business Ed. Plus
    Having done it with the bumper off I think it would be fiddly but doable with the bumper on. You can remove the bottom plastic grille on my gen 3 by pushing it inwards (some clips to release). hopefully you can then angle the grille out and attach the mesh with cable ties to it. would also give you a somewhere to work your arms in from the bottom whilst you worked on the smaller grille slots at the top.
     
  11. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,675
    39,222
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Yeah I was thinking to remove the black-plastic undershield directly behind the painted-plastic "bumper", and the black plastic panel atop the cross-bar at the front/top of engine bay. Maybe raise the front end of car a bit too.

    Contemplating using 1/4" galvanized steel anti-rodent mesh.
     
  12. adrian-gregory

    Joined:
    Jul 27, 2021
    61
    40
    3
    Location:
    GAIA
    Vehicle:
    2010 Prius
    Model:
    Business Ed. Plus
    Galvanised rodent mesh would be great. my thoughts were anything is better than nothing. there were a lot of stones in the tray approaching the radiator, along with usual debris.
     
    Mendel Leisk likes this.
  13. adrian-gregory

    Joined:
    Jul 27, 2021
    61
    40
    3
    Location:
    GAIA
    Vehicle:
    2010 Prius
    Model:
    Business Ed. Plus
    On the hunt for a set of original 15 inch alloys.
     
  14. adrian-gregory

    Joined:
    Jul 27, 2021
    61
    40
    3
    Location:
    GAIA
    Vehicle:
    2010 Prius
    Model:
    Business Ed. Plus
    Set now purchased. I'll remove the Dunlop Winter Maxx tyres and sell them and get some Michelin Cross Climate + fitted when they arrive. I like the look of the 17's and the handling on the car BUT we have plenty of potholes and rough road surfaces here and the 17's are not ideal. If the ride etc is acceptable on the 15's I might look to sell the 17's on.
     
  15. KevininFl

    KevininFl Junior Member

    Joined:
    Nov 20, 2018
    59
    16
    0
    Location:
    Fort Myers Fl.
    Vehicle:
    2013 Prius
    Model:
    ----USA----
    I would run Liqui Moly Engine Flush,Then AMSOIL 10W30 Signature Series. You Always get what you pay for with Oil.
     
  16. adrian-gregory

    Joined:
    Jul 27, 2021
    61
    40
    3
    Location:
    GAIA
    Vehicle:
    2010 Prius
    Model:
    Business Ed. Plus
    Ordered new gas struts for tailgate from SGS Engineering. old ones were getting weak. weather colder in the evenings now and i got a nice clack to the head - opened the tailgate whilst looking over my shoulder and talking to a friend - turned around into the tailgate (expecting it to be a lot higher than it was).
     
  17. adrian-gregory

    Joined:
    Jul 27, 2021
    61
    40
    3
    Location:
    GAIA
    Vehicle:
    2010 Prius
    Model:
    Business Ed. Plus
    Cleaned throttle body after remembering i had not done it since getting the car. Was pretty clean in any case.

    For others this video is useful:
     
  18. adrian-gregory

    Joined:
    Jul 27, 2021
    61
    40
    3
    Location:
    GAIA
    Vehicle:
    2010 Prius
    Model:
    Business Ed. Plus
    4 x Michelin Cross Climate + 195/65 R15 ordered.
     
  19. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,675
    39,222
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Did you lift it off the intake manifold for the cleaning? It’s not hard, affords easier access, and doesn’t require disconnection of the coolant lines; they have sufficient slack.

    the attachment has torque values for the throttle body hold-down bolts/nuts. A 1/4” drive torque wrench is optimum, 3/8” will do but the torque values will be very near (or below) it’s low end setting.
     
    mtl and michael myers like this.
  20. adrian-gregory

    Joined:
    Jul 27, 2021
    61
    40
    3
    Location:
    GAIA
    Vehicle:
    2010 Prius
    Model:
    Business Ed. Plus
    Thank you Mendel. I did and left coolant lines attached (read that in one of your posts when i first came to the forum). Makes it a very quick and easy job.