1. Attachments are working again! Check out this thread for more details and to report any other bugs.

GEN 4 12v Battery BACK ORDER?

Discussion in 'Gen 4 Prius Main Forum' started by Tesh, Aug 2, 2021.

  1. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,032
    49,994
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    spark plugs go early down under?(n)
     
    alanclarkeau and Mendel Leisk like this.
  2. alanclarkeau

    alanclarkeau Senior Member

    Joined:
    Feb 24, 2016
    7,044
    7,586
    0
    Location:
    near Brisbane, Australia
    Vehicle:
    2016 Prius
    Model:
    N/A
    Well, that's what the Dealer said. I don't doubt they might be able to scrounge some from another dealer if they were interested.
     
  3. Mambo Dave

    Mambo Dave Active Member

    Joined:
    Jul 5, 2019
    641
    306
    0
    Location:
    33312
    Vehicle:
    2019 Prius
    Model:
    L Eco
    Still a good idea that someone goes in and breaks the plugs loose, then re-torques them. Leaving plugs in aluminum heads for 100,000 miles has been an expensive venture for a lot of folks when the threads the plugs were stuck to get pulled out. Plugs are usually steel, heads are aluminum these days. Current theory is to use anti-seize on replaced spark plugs.
     
  4. Colorado Boo

    Colorado Boo Active Member

    Joined:
    Jun 23, 2021
    307
    202
    8
    Location:
    Monument, Colorado USA
    Vehicle:
    2021 Prius
    Model:
    LE AWD-e
    It's smart, when replace spark plugs, to have the car warm, not hot or cold. No need to put anti-seize on them, but some will put just a very small amount (like Permatex) on the edge of the plug where the coil sits (the white ceramic part.)

    One caution for everyone who replaces plugs is to GENTLY remove the electrical clip from the coil because the plastic gets brittle over the years. You have to squeeze one side then pull it off. It's smarter to use a little metal pick tool to lift the side on the coils up while squeezing the other. Having one break on you is a nightmare.
     
    Mambo Dave likes this.
  5. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,605
    39,185
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Reduce torque maybe 25% if using anti seize (dry thread torque is 15 ft/lb).
     

    Attached Files:

    #25 Mendel Leisk, Aug 19, 2021
    Last edited: Aug 19, 2021
    Mambo Dave likes this.
  6. Mambo Dave

    Mambo Dave Active Member

    Joined:
    Jul 5, 2019
    641
    306
    0
    Location:
    33312
    Vehicle:
    2019 Prius
    Model:
    L Eco
    Good points, gents.
     
    Mendel Leisk likes this.
  7. Ramo_958

    Ramo_958 Junior Member

    Joined:
    Aug 29, 2020
    22
    10
    0
    Location:
    Doylestown, Pennsylvania
    Vehicle:
    2018 Prius
    Model:
    One
  8. alanclarkeau

    alanclarkeau Senior Member

    Joined:
    Feb 24, 2016
    7,044
    7,586
    0
    Location:
    near Brisbane, Australia
    Vehicle:
    2016 Prius
    Model:
    N/A
    Mine is 5½yrs almost.
     
  9. Ramo_958

    Ramo_958 Junior Member

    Joined:
    Aug 29, 2020
    22
    10
    0
    Location:
    Doylestown, Pennsylvania
    Vehicle:
    2018 Prius
    Model:
    One
  10. Elt31987

    Elt31987 Active Member

    Joined:
    May 25, 2016
    205
    151
    0
    Location:
    Derry, NH
    Vehicle:
    2016 Prius
    Model:
    Two
    Mines 5 years this past June. Resistance is getting high but its still testing good. Ill ride it till it dies since i have a portable jump pack and im curious how long this thing is going to go lol