New ( junkyard engine) Now can't bleed cooling system

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Maple50175, Aug 9, 2021.

  1. Maple50175

    Maple50175 Junior Member

    Joined:
    Jul 25, 2021
    7
    1
    0
    Location:
    MA
    Vehicle:
    2010 Prius
    Model:
    LE
    Now i can't bleed the coolant. Put the engine in. Put in coolant. Let it go in maintenance mode lots of air and bubbles and loud noise coming out of the coolant lines. when for a drive and saw Red temp light come on. Pulled over looked at coolant added more.. seems like it keeps getting pressures or that there is tons of air in the system? I used water and not i may drain it and refill it slowly.

    Or is my headgasket toast and i got screwed by the junkyard? Was hoping to have this car sold today.
     
    #1 Maple50175, Aug 9, 2021
  2. tankyuong

    tankyuong Senior Member

    Joined:
    Nov 9, 2012
    1,555
    661
    0
    Location:
    Central MO
    Vehicle:
    2012 Prius c
    Model:
    II
    Toasted head gasket for sure with exhaust gasses forcing coolant out
     
    #2 tankyuong, Aug 10, 2021
  3. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    25,660
    16,762
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    A great thing about a leakdown tester (compared to a compression tester) is it doesn't require cranking the engine. A leakdown test could be done on an engine in a crate, before going to the trouble of installing it. I'm pretty sure I would do it, too.
     
    #3 ChapmanF, Aug 10, 2021
(You must log in or sign up to post here.)