1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Nutz About Bolts Prius Maintenance Videos

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Tideland Prius, Feb 17, 2016.

  1. cnc97

    cnc97 Senior Member

    Joined:
    Mar 13, 2018
    1,422
    1,532
    38
    Location:
    Evansville, IN
    Vehicle:
    2010 Prius
    Model:
    Three

    Just unplug the fuel injectors. Any code set will self clear after 5 startups.
     
  2. tony_2018

    tony_2018 Member

    Joined:
    Jun 12, 2019
    205
    61
    0
    Location:
    78717
    Vehicle:
    2012 Prius
    Model:
    IV
    Yeah I think thats what I'm going to do.


    These videos helped alot. Thanks to OP and creator.
     
    Raytheeagle likes this.
  3. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    6,424
    3,413
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    If you have the plugs out, unplugging the injectors will also work.
    Seems it would be a lot easier, and less risky, maybe damaging the wiring(?) to
    unplug the fuse/relay.
     
  4. Danny3xd ()

    Danny3xd () Member

    Joined:
    Sep 30, 2018
    84
    37
    0
    Location:
    Connecticut
    Vehicle:
    2010 Prius
    Model:
    Three
    Just wanted to Thank N&B for all his work and fine vids.
     
  5. Betty Craven

    Betty Craven Junior Member

    Joined:
    Jul 8, 2021
    1
    0
    0
    Location:
    Washington
    Vehicle:
    2008 Prius
    Model:
    N/A
    Do these apply to a 2008?
     
  6. Tideland Prius

    Tideland Prius Moderator of the North
    Staff Member

    Joined:
    Oct 2, 2004
    45,024
    16,244
    41
    Location:
    Canada
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    No. This applies to 2010-2015 models.
     
  7. batcat420

    batcat420 New Member

    Joined:
    Oct 22, 2021
    11
    1
    0
    Location:
    Atlanta
    Vehicle:
    2014 Prius
    Model:
    Two
    Big thanks to NaB! Recently did a round of 100k maintenance (spark plugs, coolant flush, trans fluid flush) and your videos made it easy.
     
    Rebound likes this.
  8. michael myers

    michael myers Junior Member

    Joined:
    Dec 11, 2017
    11
    6
    0
    Location:
    Chattanooga, Tn
    Vehicle:
    2015 Prius v wagon
    Model:
    V
    Thank you for posting this. You're a super hero named Prius Man.
     
    Rebound likes this.
  9. Bbonez

    Bbonez Member

    Joined:
    Nov 5, 2019
    40
    43
    0
    Location:
    USA
    Vehicle:
    2011 Prius
    Model:
    Three
    @NutzAboutBolts can I a suggest a minor edit? Your video on front brakes in the description your tool list says M8.25 hex bolt to remove the rotors, I believe the correct bolt is an M8 x 1.25. That might help others find the part a little quicker. Thanks again for all the great videos.
     
    Mendel Leisk likes this.
  10. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,686
    39,235
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Good catch. Unfortunately I think he's moved on; last post was Feb 01, 2021. He's done a few product reviews on his Youtube lately, but not Prius or automotive specific.
     
    Bbonez likes this.
  11. Rebound

    Rebound Senior Member

    Joined:
    Mar 11, 2010
    3,970
    2,618
    0
    Location:
    Portland, OR
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    You don’t need to replace those bolts; they aren’t one time use bolts.
     
  12. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,686
    39,235
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    These are extra bolts, you need to purchase, screw into threaded holes on brake rotors/drums, to help break them loose.
     
    Bbonez likes this.
  13. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,912
    16,215
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    As an alternative, M8✕1.25 bolts are used in a bunch of places on the car, so if you need a couple to pop the rotors loose, you can usually find a couple nearby to borrow, then just put them back later.
     
  14. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    6,424
    3,413
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    Take them off old worn out hubs...
     
  15. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,686
    39,235
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    A hybrid strategy: take one of those bolts from the car (typically 12 mm socket size?) verify it fits the threaded holes on rotor/drum, then take it down to hardware store, (one with bolts/nuts in bins), test thread the borrowed bolt on one of their M8 nuts, then use that nut to check-fit of their M8 bolts. 25mm fully threaded works good.

    I picked these up recently, having "misplaced" my earlier set. They're pretty ubiquitous these days.

    Reliable Fasteners Hex-Head Zinc-Plated Metric Bolt - M8 x 25mm - Blunt Point - Grade 8.8 - 3 Per Pack HBZM825MR | RONA
     
  16. kamrul

    kamrul Junior Member

    Joined:
    Nov 25, 2018
    80
    16
    0
    Location:
    Bangladesh
    Vehicle:
    2013 Prius
    Model:
    N/A
    Though I have a subscription to the channel but this post is a Goldmine to have everything organized here. Thanks for the great work!
     
    Mendel Leisk likes this.
  17. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,686
    39,235
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Yeah it’d be nice if their YouTube could have some sort of folder for Prius specific. Not sure if that’s even possible; YouTube is a bit of a pain.
     
  18. Rebound

    Rebound Senior Member

    Joined:
    Mar 11, 2010
    3,970
    2,618
    0
    Location:
    Portland, OR
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Is there anything left for them to do?
     
  19. rjparker

    rjparker Tu Humilde Sirviente

    Joined:
    Jun 6, 2008
    8,498
    5,064
    7
    Location:
    Texas Hill Country
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    Thats a playlist if configured by the content creator. A user can create folders under his own account for any combination of videos.

    This is my folder of 54 specific videos from different creators.
    EB40C5D3-67B6-4BBE-A3EC-AADAAD59115E.png DC2C4D3C-9050-48E6-BFB5-31D8F07C4E1C.png

    Plus you can have more specific folders that may duplicate videos in another folder
     

    Attached Files:

    #439 rjparker, Nov 21, 2022
    Last edited: Nov 21, 2022
    Mendel Leisk likes this.
  20. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,686
    39,235
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Head gasket replacement? I think their videos are only about what befalls their Prius, so knock on wood he never needs to do that one. He did mention getting a Sienna I think, so maybe the Prius is gone.