1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Maintenance Required Light after Combination Meter Replacement

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Kenzo, May 15, 2021.

  1. Kenzo

    Kenzo New Member

    Joined:
    Oct 7, 2020
    6
    4
    0
    Location:
    California
    Vehicle:
    2007 Prius
    Model:
    Plug-in Base
    I replaced my combination meter and I was wondering if this affected the maintenance required light interval. I am past the 4,500 miles when the light should start blinking when starting up the engine. Did the new combination meter reset the interval?
     
    #1 Kenzo, May 15, 2021
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,156
    50,059
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    i'm not sure, but it's possible that the fuction is stored in the meter.

    i would just do your 5k maintenance at 5k and record it for the next one.

    when the message comes on again, record the miles for reference. if you don't mind staring at the message for a while, you could reset it 4500 miles after your 5k maintenance.
     
    #2 bisco, May 15, 2021
  3. TMR-JWAP

    TMR-JWAP Senior Member

    Joined:
    Aug 12, 2016
    6,404
    6,062
    0
    Location:
    Columbia, SC
    Vehicle:
    2007 Prius
    Model:
    Touring
    The 4500-5000 mile "timer" can be reset at any time, even if it's not on. If it's time, just change the oil and use the normal reset procedure and your OCI will be synched again.
     
    #3 TMR-JWAP, May 15, 2021
  4. Kenzo

    Kenzo New Member

    Joined:
    Oct 7, 2020
    6
    4
    0
    Location:
    California
    Vehicle:
    2007 Prius
    Model:
    Plug-in Base
    Thnaks bisco and TMR-JWAP. That's helpful.
     
    #4 Kenzo, May 15, 2021
(You must log in or sign up to post here.)