2007 hatch release has no power

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by rkeith3472, May 15, 2021.

  1. rkeith3472

    rkeith3472 New Member

    Joined:
    Sep 30, 2020
    6
    0
    0
    Location:
    Alabama
    Vehicle:
    2007 Prius
    Model:
    Two
    ✔️ The battery is good
    ✔️ I checked both the 25amp and 7.5amp fuses and both are good and they are getting power
    ✔️ I checked it with the car running and off

    There is no power to the tiny harness that connects the hatch switch. I checked all 4 pins and nothing! Any ideas?
     

    Attached Files:

    #1 rkeith3472, May 15, 2021
  2. rjparker

    rjparker Tu Humilde Sirviente

    Joined:
    Jun 6, 2008
    9,125
    5,528
    7
    Location:
    Texas Hill Country
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    No connector between the body ecu and the switch. In most cases its the switch.
     

    Attached Files:

    #2 rjparker, May 15, 2021
  3. Fred_H

    Fred_H Misoversimplifier

    Joined:
    Apr 20, 2007
    558
    479
    28
    Location:
    Germany
    Vehicle:
    2007 Prius
    Model:
    Touring
    If you determine that one of the wires between the body ECU and the switch harness is not conducting properly, then a likely place to look for a broken wire is inside or near the rubber bellows where the wires go through from the roof to the hatch.
     
    #3 Fred_H, May 15, 2021
  4. rjparker

    rjparker Tu Humilde Sirviente

    Joined:
    Jun 6, 2008
    9,125
    5,528
    7
    Location:
    Texas Hill Country
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    7176A8F2-EA16-4453-BA77-C74DE2389064.jpeg
     
    #4 rjparker, May 15, 2021
(You must log in or sign up to post here.)