1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Android headunit

Discussion in 'Gen 4 Prius Audio and Electronics' started by jteran5, Aug 21, 2020.

Page 3 of 3
  1. jteran5

    jteran5 Active Member

    Joined:
    Nov 4, 2019
    413
    203
    0
    Location:
    NJ
    Vehicle:
    2019 Prius
    Model:
    XLE AWD-e
    I had a shop install for me so not sure how it worked. My controls work fine and I didn't have to change the canbus settings. As for the rear camera, it should be controlled by the canbus. I used an aftermarket camera so cant comment on the stock one... Did you receive the canbus? I'll take a look at my canbus settings tomorrow

    Posted via the PriusChat mobile app.
     
    #41 jteran5, Dec 20, 2020
  2. FiremanNZ

    FiremanNZ New Member

    Joined:
    Aug 15, 2020
    21
    8
    0
    Location:
    NZ
    Vehicle:
    2016 Prius
    Model:
    N/A
    Yes, Canbus unit is present, and see photos - it was delivered set to number 08 'Camry&Rav4(simple)'

    There's no setting in any of the ~140 Canbus options that mentions 'Prius'.

    Hopefully it'll all work when I can get the Canbus set up properly. Is there somewhere I can do a quick and easy check on whether the Canbus is working or not? Something like a... page of gauges maybe? I couldn't find one.
     
    #42 FiremanNZ, Dec 20, 2020
  3. Thinkfire

    Thinkfire Junior Member

    Joined:
    Sep 29, 2017
    25
    17
    0
    Location:
    Michigan
    Vehicle:
    2017 Prius
    Model:
    Three
    Following
     
    #43 Thinkfire, Jan 2, 2021
  4. Eendenman

    Eendenman New Member

    Joined:
    Jan 28, 2021
    1
    0
    0
    Location:
    The Netherlands
    Vehicle:
    2016 Prius
    Model:
    N/A

    Did you connect the yellow male RCA plug to the brown female plug on the picture (nr 8?). My camera didn't work at first, until I noticed I had to do this.

    My canbus settings are the same as yours, and they work. I do still have a problem with buzzing noise. I've bought the adapter mentioned in this topic previously ("speaker line adapter to RCA"), but the seller said it probably wouldn't fit. The connection seems the same to me though, so I'm hoping that it will work.
     

    Attached Files:

    #44 Eendenman, Jan 28, 2021
  5. hg1027

    hg1027 New Member

    Joined:
    May 7, 2021
    4
    2
    0
    Location:
    Houston Texas
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    For those of you with whine issues, have you tried ground loop isolators? I've had a few aux in devices with a whine when no input, and either directly grounding the shield at the micro USB, or tapping in to the cable shield have resolved.
     
    #45 hg1027, May 12, 2021
    Leadfoot J. McCoalroller likes this.
(You must log in or sign up to post here.)
Page 3 of 3