1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Which Ecopias are you running?

Discussion in 'Gen 4 Prius Main Forum' started by jteran5, Mar 7, 2021.

  1. jteran5

    jteran5 Active Member

    Joined:
    Nov 4, 2019
    413
    203
    0
    Location:
    NJ
    Vehicle:
    2019 Prius
    Model:
    XLE AWD-e
    So I was kinda making the leap into the Ecopias but found four variants. Not sure if there's a specific one preferred or if people are even aware of the one they're buying.

    Based on this list below, I'm leaning towards the 3rd one, the 91S variant as it supposedly is a pound lighter and has the smallest tread width so figure it has a smaller contact PATCH. However, the last one from Mexico has the lowest wear rating but a higher max psi, so sidewall is softer and more comfortable maybe?

    Maybe that's why the reviews here of the Ecopias vary as there are different kinds and maybe some are noisier or perform worse than others. Screenshot_20210307-232253_Brave.jpeg

    Posted via the PriusChat mobile app.
     
    #1 jteran5, Mar 7, 2021
    Last edited: Mar 7, 2021
  2. Pulse07

    Pulse07 Active Member

    Joined:
    Feb 24, 2020
    273
    139
    0
    Location:
    East Bay, California
    Vehicle:
    2020 Prius
    Model:
    XLE AWD-e
    you're probably thinking too much about it. I see the country of origin are different and aside from that the only other differences are the speed rating and load rating. You probably aren't going to find a store that stocks the 3rd one since its made in Japan while the first one that is very similar is made is USA. IMO probably just go with what the store has in stock, they look similar.
     
    #2 Pulse07, Mar 7, 2021
    krmcg likes this.
  3. jteran5

    jteran5 Active Member

    Joined:
    Nov 4, 2019
    413
    203
    0
    Location:
    NJ
    Vehicle:
    2019 Prius
    Model:
    XLE AWD-e
    These are all in stock and ready to ship from tirerack. Was going to place an order but wasn't sure which would be better and whatever everyone else uses (if they're even aware)

    Posted via the PriusChat mobile app.
     
    #3 jteran5, Mar 8, 2021
  4. alanclarkeau

    alanclarkeau Senior Member

    Joined:
    Feb 24, 2016
    7,044
    7,587
    0
    Location:
    near Brisbane, Australia
    Vehicle:
    2016 Prius
    Model:
    N/A
    Firstly - eliminate thinking about "higher max psi". It's totally irrelevant to all intents and purposes.
     
    #4 alanclarkeau, Mar 8, 2021
    Pulse07 and jteran5 like this.
  5. priusman09

    priusman09 I used to be a TDI

    Joined:
    May 23, 2010
    67
    76
    0
    Location:
    wisconsin
    Vehicle:
    2009 Prius
    Model:
    N/A
    So I have the Ecopias on my Prime as standard equipment. If you toggle the selections on tire rack it shows this one as the standard Ecopia that was installed oem- (see pic) Hope this helps
     

    Attached Files:

    #5 priusman09, Mar 8, 2021
  6. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,671
    39,221
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    I think Bridgestone has made a serious mis-step, with the multitude of Ecopia EP422 iterations*.

    Anyone remember the EP20 btw? Seems (sadly) they're being phased out, judging by tirerack.

    * Reminds me of:

    Casino Royale (1967 film) - Wikipedia
     
    #6 Mendel Leisk, Mar 8, 2021
(You must log in or sign up to post here.)