What did you do to ur Gen III Prius today????

If we didn't ask so often, we'd have fewer windstorms.

 

Wasn't today, but rear G bumper and rear G delete.

IG: twnzy_

 

I love the G's rear bumper!

What spoiler is that? I've been considering switching from the wing to a spoiler like that for a while now.

 

Speziell.

Since you like the G rear, here's double the G. GG.

IG: twnzy_

 

Here's how mines sitting right now, besides the dirt.

 

It's like seeing double white Henry.


Are you going to get G/phv headlights any time soon. I have one spare headlight... Can sell it as a set once I complete the set.

IG: twnzy_

 

They'd definitely look better than the stock headlights, so if you manage to complete the set let me know!

 

I installed the forward portion of the Cat Defender converter shield today. I used M6 rivet nuts, M6x16 bolts and fender washers to install it. I also used M6 rivet nuts, M6x12 bolts and fender washers to install the engine under cover. No more busted or broken push pin rivets.

 

Picked up my turn signals for my mirrors.

This should be a fun install and will upload finished pics later.

Posted via the PriusChat mobile app.

 

Cleaned out the intake manifold and slapped a new gasket on it.
Cleaned a couple hoses that connect to it that had a lot of gunk in them.

Posted via the PriusChat mobile app.

 

Replacing inverter and engine radiators. Can't drain inverter because somehow the damn thing is in there and I stripped it. Time to chisel it out.....

 

Sonofabitch, I got lucky and was able to get it out. Gonna order a replacement and washer. Coolant drained and now time to remove the inverter.

 

Installed new fog lights bulbs this morning, amber yellow , major improvement compared to useless stock ones.... here’s some pics , will update when tried at night ...

 

I take it you got the drain plug loosened?
Are you going to replace it with a good one?

 

You damn right I am.

 

I'm very sceptical about that 2800 lumen rating on the box, based on the configuration of the actual LEDs.

Posted via the PriusChat mobile app.

 

Here is the link for complete specs for the fog lights :H8 H11 LED Fog Light Bulbs, 6500K White/8000K Blue/3000K Amber Yellow

Tried couple of times at night and works fantastic ....

 

Performed a intake manifold cleaning and EGR cooler / valve cleaning, intake port cleaning and coolant change on my 2015 Prius 90240 miles. The job took 2 days and the most challenging part was removing the EGR cooler.

one tip to easily clean the EGR cooler is to use Nucalgon condenser cleaner. It cleaned all the carbon off within 10 minutes. No scrubbing, simply soak and rinse off the cooler and solvent and dry off.

the car sputtered after I started it for a few moments but it was due to the computer trying to recalibrate due to less air restriction. Here are some pictures.

 

Ah OK, couldn't tell from your original pics that these are COB (circuit on board) LEDs with multiple emitting diodes all around and on the front end.

I guess the COB-72 means there are 72 diodes emitting light?

Posted via the PriusChat mobile app.

 

Here is what I found about COB ....
COB LED Basics: A Beginner's Guide - LED Gardener