New Owner 2010 Prius Missing Bolts

Hello all,

First post, so if I do something wrong or leave something out that needs to be addressed, then please let me know... I bought my car from an auction. It has high mileage 196k. I have gone through and replaced a number of parts and cleaned some parts that needed some TLC. I have replaced the spark plugs, PCV valve, and a number of missing bolts and nuts. I have been trying to find the part number or the dimensions for a few bolts. There are 2 bolts on top of the valve cover that I am missing.
One bolt is missing from in between where the spark plugs are connected. It is in between cylinder 1 and cylinder 2 on the valve cover. See the picture below:


One bolt is missing that looks like it grounds a wire to the top of the valve cover. See the second picture below:



Part numbers would be great because the Toyota dealer parts department that I went into couldn't tell me anything. Smh. Any help would be greatly appreciated.

 

@Paul E. Highway Highway

I will take a look at the site and let you know if I can find it. Thanks.

 

@Georgina Rudkus in all the videos and pics that I have seen of the exposed engine cover the missing part seems to be a metal bolt and a washer I believe. See the picture below from a video from 1A Auto. It's the bolt above the engine oil filler cap and between cylinder 1 and 2.

 

@Paul E. Highway I have searched through the exploded views on the aforementioned parts for Toyota site before and gave it another lengthy look the last hour or so. I cannot find a view that shows the bolts that are missing from above. If you know of a diagram, or a view that I can examine, then please attach a link or a screen shot.

 

@vvillovv that looks like the best information to date. I looked at the Toyota parts site for like 2.5 hours clicking everything, but that because why would they put it in the cylinder head components when it's for the valve cover. Smh. I should have just clicked it, too. I'll check out the pricing at the link you use, and call the Toyota spot, too. Thanks.

bolt 11201H
gromet 11201B

 

@vvillovv

I followed the eBay link and I'm positive that that image is missing 1 bolt. There should be 17 total for the engine valve cover per the repair manual. There are 12 around the perimeter and 4 for the ignition voils, plus the 1 bolt that I'm missing to get to 17. I was able to get some pages from the repair guide from another member in another post that discusses the number of bolts and torque specs just not the bolt sizes.

 

Just a quick update:
- Missing Valve Cover Bolt 1
I will be ordering the bolt that goes into the valve cover between cylinder 1 and cylinder 2 from the dealer, tomorrow. The diagram listed on the toyota parts website under cylinder head then clicking more items was the key to finding that missing bolt. Thanks to everyone who helped me find this missing bolt.
- Missing Valve Cover Bolt 2: (Ground Bolt)
I was able to determine that the other bolt that I was missing is the ground bolt for the engine. It doesn't pop up on any diagram, so I followed another member's suggestion and tried another couple of bolts from the same area. The best match that I found was the bolt from the ignition coil wiring harness on the cabin side of the engine. So, I just took it down to an auto parts store that sells nuts and bolts. So, if anyone else is missing this same bolt I'll attach the sizing in a picture message and post it here.
Just in case some people have issues with the picture loading, here is the size you need: M6-1.0x16mm

Thanks everyone. I still have some work to get the car back to road ready, but I appreciate all the help here!