Help! Car turns on but shuts off after a few seconds + check hybrid system

Discussion in 'Gen 3 Prius Technical Discussion' started by Metaleckz, Sep 20, 2020.

  1. Metaleckz

    Metaleckz Junior Member

    Joined:
    Oct 22, 2018
    23
    4
    0
    Location:
    San Francisco
    Vehicle:
    2010 Prius
    Model:
    II
    Hello. I need your guys help
    I have a 2010 prius with 180k miles
    The inverter gave out on me 2 weeks ago. So i replaced that and all is well. After 4 days, my car broke on me again and it says the same “check hybrid system” i thought it was the inverter but when i ran the code. P3191, P3190 and P0A0F popped up. So its not the inverter and its something else. Now when i turn it on, the engine turns on but it would shut off after a few seconds. Do you guys know what could it be?

    edit: sorry. Its P3191 and P3190
     
    #1 Metaleckz, Sep 20, 2020
    Last edited: Sep 20, 2020
  2. RRxing

    RRxing Senior Member

    Joined:
    Jul 7, 2009
    2,526
    1,801
    0
    Location:
    NEPA
    Vehicle:
    Other Hybrid
    Model:
    Limited
    P1391 and P3090 don't appear to be valid codes in my Digital Trouble Codes (DTC) list. Here's what I see for P0A0F (not much help, I'll admit):

    Screen Shot 2020-09-20 at 6.03.45 PM.png
     
    #2 RRxing, Sep 20, 2020
  3. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    25,678
    16,775
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    I would guess typos for P3190 and P3191. Important to type those pesky codes correctly in forum posts.
     
    #3 ChapmanF, Sep 20, 2020
  4. RRxing

    RRxing Senior Member

    Joined:
    Jul 7, 2009
    2,526
    1,801
    0
    Location:
    NEPA
    Vehicle:
    Other Hybrid
    Model:
    Limited
    If so, then...
    Screen Shot 2020-09-20 at 7.42.30 PM.png Screen Shot 2020-09-20 at 7.42.42 PM.png
     
    #4 RRxing, Sep 20, 2020
  5. Elektroingenieur

    Elektroingenieur Senior Member

    Joined:
    Jan 8, 2017
    2,515
    3,273
    9
    Location:
    California
    Vehicle:
    2016 Prius
    Model:
    Three Touring
    The combination of diagnostic trouble codes (DTCs) P0A0F with P3190 and P3191 (assuming @ChapmanF's theory is correct) is mentioned in Toyota bulletin T-SB-0041-15, “MIL ‘ON’ DTC P0A0F, P3190, P3191, P0171 Due to Purge VSV Vacuum Line Separation” (PDF), issued June 30, 2015. The inspection of the hose and vacuum line in step 1, page 5, determines whether the repair procedure in the bulletin applies. If not, the Repair Manual (more info) has detailed troubleshooting procedures.
     
    #5 Elektroingenieur, Sep 20, 2020
  6. Metaleckz

    Metaleckz Junior Member

    Joined:
    Oct 22, 2018
    23
    4
    0
    Location:
    San Francisco
    Vehicle:
    2010 Prius
    Model:
    II
    I wish it was that one but both hoses are intact.
     
    #6 Metaleckz, Sep 21, 2020
    T.Mehmood Khokhar likes this.
(You must log in or sign up to post here.)