1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Headlight adjustment help needed, 2006 non-HID

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by sb_in_nc, Sep 25, 2006.

  1. sb_in_nc

    sb_in_nc New Member

    Joined:
    Feb 23, 2006
    19
    0
    0
    Hello,

    I can tell my headlights are pointing too high and I know I should take it to a body shop or dealer to get computerized adjustment, but does anyone know how I can manually adjust them? I know they need to be turned down a little.

    2006 package #1 with standard headlights.

    Sorry if I've blinded you at night,
    Scott
     
    #1 sb_in_nc, Sep 25, 2006
  2. Charles Suitt

    Charles Suitt Senior Member

    Joined:
    Oct 8, 2004
    1,637
    16
    0
    Location:
    Dallas TX
    Vehicle:
    2012 Prius
    Model:
    Four
    <_< Owner's Manual - Section 8-3 "Do-It-Yourself Maintainence" (Page 302 in my 2004 Manual). I used a Phillips Screwdriver with an 8" shaft.

    Tips: You need to remove the radiator support cover lid (black plastic cover just behind the radiator tank held in place with 6 dritz-type fasteners - just turn each one about ¼ turn and pull up). The screwdriver shaft will need to engage the slot above and behind the adjusting "gear wheel." The illustration in your Manual does not show these slots, but if you place the screwdriver shaft in the slot, it provides helpful leverage.

    Really surprising how much useful information can be found in the Owner's Manual.
     
    #2 Charles Suitt, Sep 25, 2006
  3. sb_in_nc

    sb_in_nc New Member

    Joined:
    Feb 23, 2006
    19
    0
    0
    Charles,

    Thanks for the post. I did read the Owner's Manual and the 2006 version doesn't have anything regarding headlights except for replacing the bulbs (also section 8-3).

    I see what might be adjusting "gear wheels." Any chance you can post the contents of your page 302?
     
    #3 sb_in_nc, Sep 25, 2006
  4. Charles Suitt

    Charles Suitt Senior Member

    Joined:
    Oct 8, 2004
    1,637
    16
    0
    Location:
    Dallas TX
    Vehicle:
    2012 Prius
    Model:
    Four
    :( I have tried 4 times to upload a scan of my Page 302... every attempt, PriusChat kicks me out. I have added JPG files in the past without problems. I will keep trying later. I will file an error report with PriusChat.
     
    #4 Charles Suitt, Sep 25, 2006
  5. Charles Suitt

    Charles Suitt Senior Member

    Joined:
    Oct 8, 2004
    1,637
    16
    0
    Location:
    Dallas TX
    Vehicle:
    2012 Prius
    Model:
    Four
    :mellow: I re-scanned Page 302... This time it worked... Hope it helps you.

    [attachmentid=5167]

    Although I haven't tried, it looks like you could adjust using a small wrench on the hex-head...
     

    Attached Files:

    #5 Charles Suitt, Sep 25, 2006
    broski and GlamourHippie like this.
  6. sb_in_nc

    sb_in_nc New Member

    Joined:
    Feb 23, 2006
    19
    0
    0
    Nice! Thank you very much, exactly what I was hoping. Now the phillips screwdriver suggestion makes sense.
     
    #6 sb_in_nc, Oct 10, 2006
(You must log in or sign up to post here.)