Auto-unlock Drivers side door not working

Hello all,

I recently did an audio upgrade (I’ll post a write up when it’s all done), including sound deadening of the doors. However, after I put the doors back together the last time, I can no longer unlock the drivers side door by just touching the door handle with the key on my person. Interestingly, it still works when I touch the passenger door handle or the hatch.

Any suggestions on where I can look to try to fix this? I put the same amount of sound deadening on both doors, but I may have inadvertently covered something up. I tried changing the battery just to make sure, but no improvement.

I did install an amp under the passenger seat, any chance I accidentally messed something up there?

Thank you for the help in advance.

 

I used CLD and CCF over the door. I used the same thing on the passenger side, which works just fine, leading me to believe this might not be the case. I did a quick check of everything, but can’t locate any wires that seem out of place. The lock/unlock functions all stick work with my key, but it does not sense my key when I walk up to unlock the doors. This works fine when approaching the rear hatch or passenger door. All window functions work as well.

I had seen in one post someone mentioned accidentally bumping a fuse near the drivers seat, but I thought all of those were under the hood. I definitely have been taking the lower panels off a lot to run speaker wire, so I may have knocked something there. Other than the wiring harnesses on the door, is there anything else I should check? Everything looks generally ok that I’ve been able to see so far